Jerkbait Rod/all around Rod

[bronzebacks]

If you want to save a few bucks i really love the zodias 6'10" m even more than the 6'10" expride. The zodias has more tip and feels faster than the expride to me. Its a great all around rod that can handle jerkbaits mid and square bill cranks lighter spinnerbaits then can throw light wire hook jigs and paddle tail swimbaits

[Cali]

Not sure if it is available in the EU, but the OG Tatula 6101MXB is great rod for what you are looking for. If it's not, the NRX 852c is a great choice, and can also be used for light contact stuff too.

[reason162]

If you want to save a few bucks i really love the zodias 6'10" m even more than the 6'10" expride. The zodias has more tip and feels faster than the expride to me. Its a great all around rod that can handle jerkbaits mid and square bill cranks lighter spinnerbaits then can throw light wire hook jigs and paddle tail swimbaits

I had the 610M Zodias, but never threw jerkbaits on it. Definitely a standout in that line of rods, along with the 72M. I might have to pick one up again just to compare to 610M expride...I did not like the metal locknut on the Zodias, that I do remember.

[Loafer]

By the way, if we talking about 1610M-2 Zodias...
On my channel i shared a little review of this rod (but only on Russian, unfortunally): https://youtu.be/YukRIS-1dDs

[bronzebacks]

By the way, if we talking about 1610M-2 Zodias...
On my channel i shared a little review of this rod (but only on Russian, unfortunally): https://youtu.be/YukRIS-1dDs

The one piece. The 610m-2 is two piece correct? I had the 610mh-2 and it was fine but it bothered me that it broke down in the middle of the rod. I ordered it thinking it was a 2 piece at the handle like the 7'2" mh expride gen 1. I should have done my research before i pulled the trigger on that one

[Loafer]

The 610m-2 is two piece correct?

Hello, Friend!
Yes, 1610M-2 is 2 pieces, center cut rod.
Despite this, it is very durable. I catched some nice pikes for my places and it withstood the load.

[Bay_Bassin86]

The NRX 852 is an amazing rod and can handle both reaction and bottom contact. I use mine for Spybaits, finesse swims and Ned rigs. I also have used the conquest 843c MBR. It’s a solid all around rod but I think it is just a little too much for treble hook baits. I’m also looking at the poison adrena 1610M or the adrena 1611m. I think the 1611m might be a little much for treble hooks

[sarcazmo]

You don't need to spend a lot to get an outstanding jerkbait rod. I use a daiwa tatula 701 MRB. In fact, I have 3! I've caught TONS of fish using the Shad Rap Deep Jerkbait and 100s. Why spend all that extra cash when this 90 dollar rod will crush it?

I also use it for shallow cranks (Teckel Drunker, Warts, ETC) and Spinnerbaits.