Inductors: Type R+ vs Mag Z
-
- Senior Angler
- Posts: 50
- Joined: Mon Dec 12, 2016 6:37 pm
Inductors: Type R+ vs Mag Z
Hi everyone.
I am in the process of tinkering with some spools.
Was wondering if say a 1016 magz and a 1012 magz...34mm spools
If i replaced the inductor, spring and centri block to type R+ would it make any difference casting wise?
Also with regards to springs what is stiffer? I m looking at the most stiff one to play with lol.
I have some existing ideas....
1) Stock RCS magz
2) HLC Og zillion
3) Type R+
4) 2020 size spring
I am in the process of tinkering with some spools.
Was wondering if say a 1016 magz and a 1012 magz...34mm spools
If i replaced the inductor, spring and centri block to type R+ would it make any difference casting wise?
Also with regards to springs what is stiffer? I m looking at the most stiff one to play with lol.
I have some existing ideas....
1) Stock RCS magz
2) HLC Og zillion
3) Type R+
4) 2020 size spring
-
- Elite Angler
- Posts: 641
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
Re: Inductors: Type R+ vs Mag Z
Not much help on what you're asking, but I recently installed an R+ spring on a SV105 spool and it opened that thing up quite a bit( that's mostly what they're advertised for). Was getting really good distance on 3/8-1/2 on a Med travel rod, mind you. I'm interested in others opinions.
I have a 1016 in a T3 MX that blows my mind. Couldn't imagine it much better until your question got me thinking. Hope others have tried the swap.
I have a 1016 in a T3 MX that blows my mind. Couldn't imagine it much better until your question got me thinking. Hope others have tried the swap.
-
- Senior Angler
- Posts: 50
- Joined: Mon Dec 12, 2016 6:37 pm
Re: Inductors: Type R+ vs Mag Z
Thanks MM.
Just got my inductor it won't fit in either of my 1016s
Just got my inductor it won't fit in either of my 1016s
-
- Platinum Angler
- Posts: 1464
- Joined: Sat May 10, 2014 12:24 pm
- Location: Donkin, Nova Scotia
Re: Inductors: Type R+ vs Mag Z
You have to keep the inductor blocks with their respective spools, they aren't interchangeable. The RCS spools (1010, 1012, 1016) use different blocks than Magforce spools so that makes swapping spools between the two impossible. You can swap springs though, the Type R+ and HLC spools will be stiffer.
-
- Senior Angler
- Posts: 50
- Joined: Mon Dec 12, 2016 6:37 pm
Re: Inductors: Type R+ vs Mag Z
Thanks Adam.
Any idea if a OG zillion HLC inductor will fit in a 1016?
Any idea if a OG zillion HLC inductor will fit in a 1016?
-
- Platinum Angler
- Posts: 1464
- Joined: Sat May 10, 2014 12:24 pm
- Location: Donkin, Nova Scotia
Re: Inductors: Type R+ vs Mag Z
I'm not sure, but there are two different HLC spools: one that comes with the HLC reel and another that was released through three I'ze Factory tuning shop. The I'ze spool is ported whereas the stock HLC spool is dimpled.fishingkat wrote: ↑Sat Apr 13, 2019 8:30 pmThanks Adam.
Any idea if a OG zillion HLC inductor will fit in a 1016?
Re: Inductors: Type R+ vs Mag Z
I have OG HLC Zillion and that's 36 mm spool. That's great spool for distance casting but in basic fishing situation it's pretty horrible. Maybe it would get better with thinner mono and not to be spooled full.
I have also I'ZE Factory HLC spool which is for Steez (34 mm) and I us it with sv tw Zillion. That is great spool for seatrout fishing. Inductor spring feels a lot of weaker than in OG HLC Zillion and basic location of inductor seems different between these spools.'
I have also 2 of Steez 103 spools with Type-r+ inductors. One is equipped with HLC spring and another is standard. I haven't done accurate comparison between I'ZE Factory HLC spoold and 103 spools but I consider that there's no big difference in ordinary fishing situation. But 103 Spools are V spools and there's Magforce V, and I think that inductor doesn't fit to other spool types.
But sv tw Zillion standard spool, that I have been thought to swap some stronger spring.
I have also I'ZE Factory HLC spool which is for Steez (34 mm) and I us it with sv tw Zillion. That is great spool for seatrout fishing. Inductor spring feels a lot of weaker than in OG HLC Zillion and basic location of inductor seems different between these spools.'
I have also 2 of Steez 103 spools with Type-r+ inductors. One is equipped with HLC spring and another is standard. I haven't done accurate comparison between I'ZE Factory HLC spoold and 103 spools but I consider that there's no big difference in ordinary fishing situation. But 103 Spools are V spools and there's Magforce V, and I think that inductor doesn't fit to other spool types.
But sv tw Zillion standard spool, that I have been thought to swap some stronger spring.
- Attachments
-
- Spools.JPG (52.86 KiB) Viewed 6511 times
Last edited by jvelth74 on Sun Apr 14, 2019 1:12 pm, edited 3 times in total.
Re: Inductors: Type R+ vs Mag Z
At Japan Tackle it's stated that Zillion HLC springs are 4x stiffer than stock 08 Zillion springs. How does 08 Zillion springs compare to SV?
I'm looking for a spring 2-3x stiffer than SV.
I'm looking for a spring 2-3x stiffer than SV.
Re: Inductors: Type R+ vs Mag Z
viewtopic.php?f=47&t=79627&p=637576#p637576
- SV Zillion original spool: Inductor to max: 18 g
- Steez 103 spool: Inductor to max: 30 g
- OG HLC Zillion: Inductor to max: 124 g
Seems that Zillion standard spring is ~2x stronger than spring in sv tw Zillion.
I have't taken apart other spools than one piece of Steez 103 spool. These measurements are done spring and inductor fixed to spool and scale is traditional spring type Pesola, and because of that measurements are not exact.
- SV Zillion original spool: Inductor to max: 18 g
- Steez 103 spool: Inductor to max: 30 g
- OG HLC Zillion: Inductor to max: 124 g
Seems that Zillion standard spring is ~2x stronger than spring in sv tw Zillion.
I have't taken apart other spools than one piece of Steez 103 spool. These measurements are done spring and inductor fixed to spool and scale is traditional spring type Pesola, and because of that measurements are not exact.
Re: Inductors: Type R+ vs Mag Z
I put the I'ze spring in my Og HLC, Awesome.jvelth74 wrote: ↑Sun Apr 14, 2019 11:45 amI have OG HLC Zillion and that's 36 mm spool. That's great spool for distance casting but in basic fishing situation it's pretty horrible. Maybe it would get better with thinner mono and not to be spooled full.
I have also I'ZE Factory HLC spool which is for Steez (34 mm) and I us it with sv tw Zillion. That is great spool for seatrout fishing. Inductor spring feels a lot of weaker than in OG HLC Zillion and basic location of inductor seems different between these spools.'
I have also 2 of Steez 103 spools with Type-r+ inductors. One is equipped with HLC spring and another is standard. I haven't done accurate comparison between I'ZE Factory HLC spoold and 103 spools but I consider that there's no big difference in ordinary fishing situation. But 103 Spools are V spools and there's Magforce V, and I think that inductor doesn't fit to other spool types.
But sv tw Zillion standard spool, that I have been thought to swap some stronger spring.
Re: Inductors: Type R+ vs Mag Z
Nice to hear!
I have done only one swap: HLC Spring to Steez103 spool. That made this spool very good for seatrout fishing and also in distance casting (96% of OG HLC Zillion distance). But in case of jigging perch from shore with relative light heads and headwind and not good casting space, it wasn’t good. 103 Spool with standard spring was better in that situation. In fact I found standard sv spool was best / most trouble free in that situation..
It’s the speed of cast and weight and drag of lure that determines what spool / inductor / spring is best. OG HLC Zillion (relatively heavy 36 mm spool with strong spring and small inductor, which is located deep in spool) is good for distance casting but not for ordinary fishing, in my opinion. If I would have a need to use it in fishing also I would make some spring swap to it.
But currently I think that I have enough reels (and spools) for fishing and It’s not topical to modify my OG HLC Zillion.
But formerly I used Tatula ct type-r for seatrout fishing. I found that this reel has a little too soft spring for this use. Maybe I swap Tatula’s spring to OG HLC Zillion in some day.
I have done only one swap: HLC Spring to Steez103 spool. That made this spool very good for seatrout fishing and also in distance casting (96% of OG HLC Zillion distance). But in case of jigging perch from shore with relative light heads and headwind and not good casting space, it wasn’t good. 103 Spool with standard spring was better in that situation. In fact I found standard sv spool was best / most trouble free in that situation..
It’s the speed of cast and weight and drag of lure that determines what spool / inductor / spring is best. OG HLC Zillion (relatively heavy 36 mm spool with strong spring and small inductor, which is located deep in spool) is good for distance casting but not for ordinary fishing, in my opinion. If I would have a need to use it in fishing also I would make some spring swap to it.
But currently I think that I have enough reels (and spools) for fishing and It’s not topical to modify my OG HLC Zillion.
But formerly I used Tatula ct type-r for seatrout fishing. I found that this reel has a little too soft spring for this use. Maybe I swap Tatula’s spring to OG HLC Zillion in some day.