Casting Rods... What will you spend?
Casting Rods... What will you spend?
I remember a time when G.Loomis IMX and GLX were right around $225 and $325 respectively. Well, the new GLX has now crested $400 with many models over $450 and IMX is hovering just under $300 with a few models over that magical line. GL3 has moved up to the former IMX price point and Mossyback appeared at some point in time to further blur the lines between GL3 and IMX. Inflation has taken its toll.
A lot of us indulge now and again treating ourselves to those $500 and over rods as a special treat. Some choose to never fish anything below this price point when given a choice ... ... But when it comes down to it, when looking for a quality stick to fill that whole in your lineup, where does your budget begin?
A lot of us indulge now and again treating ourselves to those $500 and over rods as a special treat. Some choose to never fish anything below this price point when given a choice ... ... But when it comes down to it, when looking for a quality stick to fill that whole in your lineup, where does your budget begin?
Cal, Managing Editor
"fish with mindfulness : beware the darkside"
"fish with mindfulness : beware the darkside"
- Hobie-Wan Kenobi
- Pro Angler
- Posts: 3014
- Joined: Tue Apr 08, 2014 1:25 pm
- Location: Michigan (U.P)
- Contact:
Re: Casting Rods... What will you spend?
It really depends on the technique. In a pinch, a lot of "budget" rods can work very well for moving baits. Not as easy with contact baits.
The Tatula line is the best bang for your buck for all techniques.
The Tatula line is the best bang for your buck for all techniques.
IG @hobie_wan_kenobi_fishing
-
- Pro Angler
- Posts: 1926
- Joined: Tue Jul 03, 2012 10:51 pm
Re: Casting Rods... What will you spend?
I am probably most comfortable in the $200-350 range. I have paid a touch more than that for rods like the NRX for example. Most of what I buy are discontinued, sale priced, rep samples, or custom builds.
- papabassin
- Elite Angler
- Posts: 614
- Joined: Thu Sep 29, 2016 1:02 am
Re: Casting Rods... What will you spend?
For me, it's mostly about "what am I using it for" and "how often do I think it will be in my hands." The least expensive rod I have in my lineup is a Powell Max 3D 705CB ($159.99) while the most expensive being a Megabass 30th LWL Evoluzion Mephisto ($699.99). However, I get the feeling that I am going to be slowly replacing the "non-enthusiast" combos eventually.
-
- Platinum Angler
- Posts: 1464
- Joined: Sat May 10, 2014 12:24 pm
- Location: Donkin, Nova Scotia
Re: Casting Rods... What will you spend?
The only rods I have paid full retail for are a pair of Tatula's. Everything else was purchased used, including my Orochi XX Shakeyhead. I don't have the disposable income that others have (yet!) but when I do I'm fairly certain I'll be happy and content to spend what I can afford to spend. Ideally, I'd love to have a couple of ARMS rods eventually.
Re: Casting Rods... What will you spend?
I've been upping my game recently. I chose top tier, not enthusiast, because I will never own a fleet of ennthusiast rods. $600 isnt out of the question for a rod I will pick up and use 30% of the time I fish. I think I will be happy with 3 high end bait cast combos. 1 mh, 1 h, and 1 xh. I have the mh and xh. Having fun hunting my perfect H power rod right now. I'll fill in the the blanks with a zillion, klx, or a fs/w/t score for topwaters, moving baits or when I want another spinning combo.
Re: Casting Rods... What will you spend?
Just picked up 2 Z-Bones from the Kistler Christmas Sale. The "Monkey" wanted a 30th Mephisto, but 2 Bones for the price of 1 mephisto was to good to pass up!
-
- Angler
- Posts: 18
- Joined: Tue Sep 20, 2011 4:51 am
Re: Casting Rods... What will you spend?
Hard to beat Daiwa full replacement policy on high end rods... encourages me to spend more
Re: Casting Rods... What will you spend?
I normally wait for a sale. Most of my NRX's are dealer demos, trade-ins, or I used gift cards. I do have a couple MB rods that I paid well over $500 for. I guess I would spend up to around $650. I'm scared of rods over that price point. I would hate to fish one and than have to upgrade my current stockpile
Re: Casting Rods... What will you spend?
I've been having a hard time trying to figure out where my point of diminishing returns is. There's no tackle stores locally anymore that carries higher end equipment, and do I don't think I have enough experience with high end rods to be able to tell the difference in a store without actually fishing them anyways.
-
- Elite Angler
- Posts: 225
- Joined: Mon Jun 01, 2015 8:58 pm
Re: Casting Rods... What will you spend?
I sort of stay in the $125 to $150 on St. Croix rods when buying new, at least so far. I have a PFS69ULF panfish rod on order now and I believe it was $119, so that confirms my pattern I guess.
But, I bought a almost new Avid Inshore 7' ML spinning rod that would have been $230 new for $140 and it is great. The trick here is to find used equipment from reliable sources . . . you can get slightly used or last year's models at big discounts. Gear nerds often buy the latest and greatest and trade it off frequently for their next purchases; and, they generally take good care of it. I guess this is analogous to buying a car from someone who gets a new one each model year.
A good point was made about the type of fishing. For moving baits it is one thing, for some of the feel, finesse applications, it pays to step up a bit more I think.
Finally, I believe it is better to have a collection of specific "lesser" rods for the sorts of fishing you employ, so if it takes, say, six rods and you are on a budget of $1000, I'd rather have six $166 targeted rods than three $333 rods that are less specific where each of the three rods might be forced to cover techniques a bit beyond their real intended use. For example, I don't want to use my T-Rig rod for drop shotting, or vice versa.
Good topic!
Brad
But, I bought a almost new Avid Inshore 7' ML spinning rod that would have been $230 new for $140 and it is great. The trick here is to find used equipment from reliable sources . . . you can get slightly used or last year's models at big discounts. Gear nerds often buy the latest and greatest and trade it off frequently for their next purchases; and, they generally take good care of it. I guess this is analogous to buying a car from someone who gets a new one each model year.
A good point was made about the type of fishing. For moving baits it is one thing, for some of the feel, finesse applications, it pays to step up a bit more I think.
Finally, I believe it is better to have a collection of specific "lesser" rods for the sorts of fishing you employ, so if it takes, say, six rods and you are on a budget of $1000, I'd rather have six $166 targeted rods than three $333 rods that are less specific where each of the three rods might be forced to cover techniques a bit beyond their real intended use. For example, I don't want to use my T-Rig rod for drop shotting, or vice versa.
Good topic!
Brad
-
- TT Moderator
- Posts: 6806
- Joined: Mon Feb 28, 2011 1:56 pm
- Location: Oxford GA
Re: Casting Rods... What will you spend?
I've spent just over $300 on a custom rod once before. With that exception, I've bought used from the boards, went with more affordable customs and indulged in a new rod from time to time. None of those have been over $240, though. A custom is really the way to go, though there is a learning curve to figuring out exactly what works specifically for you. The first few I had built were nice, but they went on to other owners because of this or that minor detail that didn't work for me. I have it pretty dialed in now. I now know my favorite components, rear grip length and material, guide train, etc. That's the beauty of a custom-you get all the good stuff and you can leave off or change what you don't like on a production rod.
Try not to let your mind wander. It is much too small to be outside unsupervised.
Re: Casting Rods... What will you spend?
I like to be around $200-$250 but I'll go higher if something catches my eye or if I'm feeling particularly stupid. For example I payed $500 for an Orochi XX JPN just because it was red and I happened to have a LIN10 Mars that needed a rod. $250 for the rod and another $250 or so in shipping and Buyee fees.
Re: Casting Rods... What will you spend?
You only live once. Buy what you can afford and enjoy it!
-
- Senior Angler
- Posts: 128
- Joined: Fri Feb 20, 2015 5:55 am
- Location: North Carolina
Re: Casting Rods... What will you spend?
If you like the rod and are comfortable paying for it, then get what makes you happy