Hi TT,
I just bought a used Steez 103HA in very good condition, but I noticed that it was quite noisy on retrieve. Upon further inspections, I noticed that the spool bearing on the 103 spool was having a lot of side to side movement. I would like to know if there anything I can do to fix this. Thanks in advance for the help!
How do I fix my loose spool bearing?
Re: How do I fix my loose spool bearing?
Bearings are relatively inexpensive it’s not worth your time or trouble to attempt fixing one unless that’s what you like to do of course. You have many options replacing or upgrading that bearing or the pair of spool bearings which are critical in the performance of your reel. Spend just a few dollars and replace or spend a little more for upgrades from ZPI, Hedgehog, TG Rockets and even Boca to just name a few.
Re: How do I fix my loose spool bearing?
I am glad to hear that it is something to do with the bearings, not the spool. I am probably going to change the spool to the RCS 1016 spool, so not sure how worth it is to do that. As always, thanks for the advice and help Lon!lpquick wrote:Bearings are relatively inexpensive it’s not worth your time or trouble to attempt fixing one unless that’s what you like to do of course. You have many options replacing or upgrading that bearing or the pair of spool bearings which are critical in the performance of your reel. Spend just a few dollars and replace or spend a little more for upgrades from ZPI, Hedgehog, TG Rockets and even Boca to just name a few.
Re: How do I fix my loose spool bearing?
The boca O/S 7s are a good upgrade, and for a better all round reel the 1016 spool is great. For lighter baits the 103 is nice, but not forgiving.
Re: How do I fix my loose spool bearing?
Yeah, I am going to throw mostly 1/4 oz to 1/2 oz hardbaits, so I really don't need it to handle anything light.
Last edited by IAY on Fri May 08, 2015 12:52 pm, edited 1 time in total.
-
- Elite Angler
- Posts: 298
- Joined: Mon Jun 25, 2012 12:32 am
Re: How do I fix my loose spool bearing?
imo the rcs 1016 isnt the est for anything under 3/8. 1/4 is where is where it cant keep up with my sv1000 spool and my revo ltz.
i seen a huge distance jump with a zara puppy when i put a sv spool im my t3 1016.
i seen a huge distance jump with a zara puppy when i put a sv spool im my t3 1016.