Level wind bearings
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Level wind bearings
Level wind bearings for a Zillion or Tatula Type-R. Are they the same size bearings that can be found in the knobs of a Shimano reel?
Re: Level wind bearings
The Tatula I know for sure are, 4X7X2.5 same as Daiwa and Shimano knob bearings. I can't remember what they are for the Zillion but I am thinking the same size.LgMouthGambler wrote:Level wind bearings for a Zillion or Tatula Type-R. Are they the same size bearings that can be found in the knobs of a Shimano reel?
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Level wind bearings
From what I got the Daiwa part # is G46-6201
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Level wind bearings
I just cant seem to find the specs for either bearing to make sure that they are the same bearing. I have soo many of the knob bearings laying around and want to do a little upgrading.
- Afrayedknot
- Pro Angler
- Posts: 1913
- Joined: Thu Jun 27, 2013 4:32 am
Re: Level wind bearings
Just tear it apart and see if it works. I am guessing they are the same size as the tatula knob/levelwind bearings.
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Level wind bearings
Hmmm. That gives me a good idea. I actually have the stock handle assembly from my Tatula Type-R. I could use those if the Shimano ones don't fit possibly.
Re: Level wind bearings
The level wind bearings from the Tackle Trap that I have used for the Zillion and Fuego are bigger than the Daiwa handle bearings. I'm sure that you can find the dimensions by searching the forums. I've seen them on a few threads.
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Level wind bearings
I have been studying the schematics for the Coastal and other Zillions, and the only bearing difference I see is the level wind bearing. Need to find the dimensions for that bearing. I hope the Shimano knob bearings are the same.
Re: Level wind bearings
The Tatula level wind bearings and handle bearings are the same size. They are 4x7x2.5.
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Level wind bearings
Perfect, thanks
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Level wind bearings
Well, the Zillion level wind bearings are not the same as the Shimano knob bearings, but for some reason I had a bearing, 1 to be exact, that fit. I don't know where it could of come from, but it worked. I went over to Mikes, from Hawg Tech, and put a swept handle with blue accents on it. Boy is it smoother than ever!
- 21farms
- Platinum Angler
- Posts: 1490
- Joined: Sun Feb 27, 2011 4:54 pm
- Location: sacramento, california
Re: Level wind bearings
i did my zillion levelwind bearings awhile ago and, IIRC, they are 5x8x2.5 (not 100% positive though). the tatulas are 4x7x2.5 for sure.
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Level wind bearings
I just did the worm gear bearings on my Tatula last night. Same bearings as the knob bearings. Put the darn thing together, but when I try to put the crank cover on something is making it tight. I cant turn the crankshaft. I don't know what the heck is going on. I will look at it again tonight.
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Level wind bearings
I dont know, something just seemed to "click" into place while just messing with it and now its OK. SMH