Problems for command an antireverse bearing

[Elpablo]

Anybody knows the size of an antireverse bearing for a curado 101D?
Bantam1 told me that the size was 16 x 10 x 8 mm but i can find it
The problem is that you can command easily the bearings for the spool in the boca bearings web but not the antireverse, they are missing in the catalog aswell.
Thank you in advance

[bocabearingslarry]

Here's a list of one way bearings we carry. If I can be of further assistance please let me know.
http://www.bocabearings.com/bearing-app ... ti-reverse

Larry

[Elpablo]

I can`t find it in your list, there are 3 posiblitys:
-I didn´t saw
-The size that Bantam1 told me is wrong
-You don`t have it this size
I can't mesure for myself because i don´t have the caliper.
Is not posible to associate the antireverse bearings with the name of the reel like the spool bearings?
Thank you Larry

[bocabearingslarry]

Here is a direct link to a 10x16x8 http://www.bocabearings.com/bearing-inv ... 08-10x16x8

thanks,
Larry

[Elpablo]

Sorry for my late response Larry , thanks for your help but i have another question .
Bantam told me that the size was 16 x 10 x 8 mm and you have put a link with the next size 10 x 16 x 8 mm,
is the same size 16 x 10 x 8 mm that 10 x 16 x 8 mm?
Thank you

[bocabearingslarry]

No problemo Elpablo, bearing dimensions read id x od x w - you cant have an ID larger than your OD I'm pretty sure you need a 10 x 16 x 8 . Let me know have you have any other questions.

[Elpablo]

Thank you Larry i`m going to command for my and for my friend , thanks for your help

[bocabearingslarry]

If you need any help just let me know.

Larry