Sasuteki weight
Sasuteki weight
Just wonder if anyone has come up with a homemade weight to sasuteki rig yet.
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Re: Sasuteki weight
You can use drop shot weights, threaded onto the hook point before you texpose the plastic.
Re: Sasuteki weight
Hadn't thought of that thanx, I'm thinking that would also work for an internal weighted tube
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Re: Sasuteki weight
I don't know. You'd probably have to use the same kind of retainer as used for trailer hooks, since there isn't much plastic in a tube wall.Kravetz wrote:Hadn't thought of that thanx, I'm thinking that would also work for an internal weighted tube
I use heavier drop shot weights (1/2 oz and up) for bubba shotting. I just open the line tie a little, and tie the weight onto the tag end with a clinch knot, since it's going into some really heavy cover.
Re: Sasuteki weight
I was thinking of somehow epoxying some sort of wire eyelet into a tungsten punch weight
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Re: Sasuteki weight
I wouldn't use expensive tungsten punch weitht to experiment with.Kravetz wrote:I was thinking of somehow epoxying some sort of wire eyelet into a tungsten punch weight
If you're going to modify a bullet weight, why not experiment with an old lead bullet weight, which is cheaper and easier to modify. You can drill out the hole a little and push your wire all the way through, and bend tabs down onto each side of the nose like a cotter pin, and then glue the wire in place with super glue.
Parasite weights make a tungsten weight that might work for you:
http://www.tacklewarehouse.com/searchre ... perpage=20
Re: Sasuteki weight
Kravetz wrote:Just wonder if anyone has come up with a homemade weight to sasuteki rig yet.
This?
viewtopic.php?f=51&t=59468&p=474335&hilit=skip#p474335
Re: Sasuteki weight
Thanx that’s exactly what I was thinking
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Re: Sasuteki weight
That's a clever idea! Thanks for sharing.Johnny A wrote:Kravetz wrote:Just wonder if anyone has come up with a homemade weight to sasuteki rig yet.
This?
http://www.tackletour.net/viewtopic.php ... ip#p474335