Hey guys I recently purchased a rod that I really like but traditionally when you tighten the foregrip down it locks the reel down into the reel seat. Mine happens to tighten but when it hits a certain point of tension it gives and loosens up . I’m afraid on the water after a while it will loosen up ... is there a cure to make the nut lock down or is it stripped ?
Thanks In advance fellas
Rod forenut won’t lock down...
-
- Platinum Angler
- Posts: 1100
- Joined: Tue Jan 22, 2008 11:52 pm
-
- Senior Angler
- Posts: 61
- Joined: Thu Feb 01, 2007 6:26 am
- Location: West Newton, PA
- Contact:
Re: Rod forenut won’t lock down...
Try a few wraps of Teflon tape on the threads to bulk them up, then reinstall the nut. It may be enough tension to keep it in place. If it's a micro guide rod, you may be able to remove the stripper guide and install a new nut, that is, if it's the nut that is stripped.
-
- Platinum Angler
- Posts: 1100
- Joined: Tue Jan 22, 2008 11:52 pm
Re: Rod forenut won’t lock down...
I ended up wrapping three times with Teflon tape and it worked perfectly . I’m happy thank god lol