Getting back into BFS
Getting back into BFS
It's been a while and that itch is back.
I had a curado 51 with an avail 915 spool that paired great with a recon 682. The only gripe I had was the skinny rod handle become uncomfortable after an hour or so of fishing.
Since then, I've parted out my gear and invested in another hobby.
Well, I'm back
I'm thinking of grabbing a curado 71 and maybe one of those diy spools hoping I could cast the same 1/16oz jig with plastic trailer that I could in the past.
What's everyones pick for a usdm bfs type rod aside from the recon or 13 omen?
Budget is 200 max.
Thanks
I had a curado 51 with an avail 915 spool that paired great with a recon 682. The only gripe I had was the skinny rod handle become uncomfortable after an hour or so of fishing.
Since then, I've parted out my gear and invested in another hobby.
Well, I'm back
I'm thinking of grabbing a curado 71 and maybe one of those diy spools hoping I could cast the same 1/16oz jig with plastic trailer that I could in the past.
What's everyones pick for a usdm bfs type rod aside from the recon or 13 omen?
Budget is 200 max.
Thanks
-
- Pro Angler
- Posts: 1513
- Joined: Fri May 08, 2015 11:43 pm
- Location: Gold Coast, Queensland. Australia
Re: Getting back into BFS
I've got a Curado 70 with HH BFS Air bearings - 6lb Sunline and it casts 2gr comfortably... No need for DIY spools etc.
- Hobie-Wan Kenobi
- Pro Angler
- Posts: 3014
- Joined: Tue Apr 08, 2014 1:25 pm
- Location: Michigan (U.P)
- Contact:
Re: Getting back into BFS
St Croix has a casting panfish rod. I also just saw today that Carrot Stix has a couple casting rods rated to 1/16 lite powered.
For under 200 bucks. Could pick up a used Alphas AIR. The DIY spool route us another option for a reel like the Curado 70 or the Daiwa Tatula reels.
For under 200 bucks. Could pick up a used Alphas AIR. The DIY spool route us another option for a reel like the Curado 70 or the Daiwa Tatula reels.
IG @hobie_wan_kenobi_fishing
-
- Pro Angler
- Posts: 1948
- Joined: Sat Aug 29, 2015 1:34 pm
- Location: NW OKC OK USA
Re: Getting back into BFS
I highly recommend that alphas, too. I got mine "used" for $242 shipped and it's pre pimped out! Shipping from Japan took two days.
This is the way.
Re: Getting back into BFS
Long time no see ... good to see ya back.
USDM BFS is a tough call. You should check out the Kuying rods over on Aliexpress. I got this one, couldn't be happier with it.
https://www.youtube.com/watch?v=eGy1yfn2vvI
USDM BFS is a tough call. You should check out the Kuying rods over on Aliexpress. I got this one, couldn't be happier with it.
https://www.youtube.com/watch?v=eGy1yfn2vvI
Re: Getting back into BFS
The Revo ROXANI BF8 can usually be had for around $130 and the Kuying TTC-662L is a fine rod that could keep you in your budget. The St Croix Panfish Rod is really nice rod as well if you want a USDM rod.
Re: Getting back into BFS
Thanks jersey! It's been a while since I've posted but I've been lurking around
Here is my previous bfs rig that I loved everything about except the skinny rod handle.
I had the avail 915 with 15/4 powerpro and 6lb floroclear leader and cast those 1/16 jigs with trailer with ease. If the curado 70/71 is capable of doing that with bearings on a proper rod, I'm sold. Those scorpion xt 1001s that pop up on fleabay are intriguing as well. I loved that platform.
Those kuying rods look great especially for the $. I've also been looking into majorcraft rods but unfortunately they no longer offer the corzza in the US and im a bit reluctant to drop that cash on the jdm offering without having any kind of warranty.
After owning an avid x ml/f that's become my go-to, I can't imagine fishing their lower tier rods.
Here is my previous bfs rig that I loved everything about except the skinny rod handle.
I had the avail 915 with 15/4 powerpro and 6lb floroclear leader and cast those 1/16 jigs with trailer with ease. If the curado 70/71 is capable of doing that with bearings on a proper rod, I'm sold. Those scorpion xt 1001s that pop up on fleabay are intriguing as well. I loved that platform.
Those kuying rods look great especially for the $. I've also been looking into majorcraft rods but unfortunately they no longer offer the corzza in the US and im a bit reluctant to drop that cash on the jdm offering without having any kind of warranty.
After owning an avid x ml/f that's become my go-to, I can't imagine fishing their lower tier rods.
-
- Pro Angler
- Posts: 1948
- Joined: Sat Aug 29, 2015 1:34 pm
- Location: NW OKC OK USA
Re: Getting back into BFS
I think you'd be fine with major craft. I love their rods. I've never heard about any quality control issues with them, certainly no broken blanks or anything like that. I think you'd like it a lot more than the St. Croix for sure. I have a couple of the panfish series spinning rods for trout and crappie, and while they're a blast to use for that, I certainly wouldn't be chasing peacocks with them, or any decent LMB for that matter. The guides are steel, so I wouldn't use braid with any bass level drag pressure, and I don't know, but I'm sure that hinders the ease of casting and pitching for distance and accuracy. The MC's on the other are bass rods through and through, yet you can still go panfishing with them. Is it as much fun catching crappie with them as it is on the St Croix's? Well, no. But at least you can hook, fight, and land fence pandas with them. Plus, there's only one panfish series casting model, a 5'6" L 1/16-1/4 iirc, so you're severely limited there. I'd look into a Benkei first, or maybe a used Volkey or other model. I seriously doubt you'd be disappointed. Good luck.
This is the way.
-
- Elite Angler
- Posts: 488
- Joined: Wed Jan 28, 2004 7:37 am
- Location: Florida
- Contact:
Re: Getting back into BFS
The Major Craft America website has Corzza's listed as on sale for 119.00 right now.
Re: Getting back into BFS
earthworm77 wrote:The Major Craft America website has Corzza's listed as on sale for 119.00 right now.
They do but the lightest available is the ML. From what they told me, they will not be continuing that series in the US.
Re: Getting back into BFS
Decided on the fuego CT with a diy spool.
Leaning toward the Phenix feather 7'1 L as a usdm option
https://www.phenixrods.com/products/freshwater/feather/
Or the kuying 662L.
Anyone have experience with the L power feather?
Leaning toward the Phenix feather 7'1 L as a usdm option
https://www.phenixrods.com/products/freshwater/feather/
Or the kuying 662L.
Anyone have experience with the L power feather?
Re: Getting back into BFS
You're gonna love the Fuego. It's a Tatula without the T-Wing. Definitely a hidden gem of a reel, especially for well under $100.sqhertz wrote:Decided on the fuego CT with a diy spool.
Leaning toward the Phenix feather 7'1 L as a usdm option
https://www.phenixrods.com/products/freshwater/feather/
Or the kuying 662L.
Anyone have experience with the L power feather?
Re: Getting back into BFS
I have this rod and it will work well with the fuego setup. It has nice build quality, very light at 3.0oz and very sensitive for the price point. You can PM me if you want to know any specific details.sqhertz wrote:Decided on the fuego CT with a diy spool.
Leaning toward the Phenix feather 7'1 L as a usdm option
https://www.phenixrods.com/products/freshwater/feather/
Or the kuying 662L.
Anyone have experience with the L power feather?