Rigging Grubs
-
- Senior Angler
- Posts: 171
- Joined: Fri Oct 26, 2007 9:49 pm
- Location: Queens NY
Rigging Grubs
What type of hook would you use to rig a 4 "or 5" Kalins single tail grub.Is a light wire hook better for grubs?
-
- Pro Angler
- Posts: 2023
- Joined: Sun Feb 27, 2011 12:51 am
- Location: East Centrl Pennsylvania
Re: Rigging Grubs
You could use a lot of different hooks. For me, 3" and 4" grubs I like using with small jig heads with light wire or Aberdeen hooks. For T-rig a grub that is 4" or 5" well that is a different story, and it depends on where I'm throwing it and the tackle I'm fishing it on. Open water swimming and bottom hopping with a 5" grub I'll be using a standard wire hook with a medium power casting set up with a 1/8oz or 3/16oz weight for depth up to 10'. If I'm fishing it in weeds I may opt to use a Gamakatsu super line hook or Owner Worm Rig-N-Hook, but the hook will match how I'm going to fish it which means what kind of cover and what kind of tackle. 90% of the time I throw a 3" grub on a 1/16oz or 1/8oz jig head with a light wire hook and I'm throwing it on medium and sometimes medium light spinning tackle with 6lb to 8lb line max.
Re: Rigging Grubs
Bullet or darter head with 1/0 to 4/0 hook
2/0 or 3/0 EWG if t-rigged
For a bait of this size I feel there are only downsides to using a light wire hook. I would only use light wire on a 3 inch or smaller bait, in an area with little to no thick cover and on 8lb test or lighter. If I was fishing in saltwater, I would also want to be fishing in an area where a larger more aggressive bycatch is fairly unlikely...and I'd still just rather use a heavy wire hook if possible. As long as the size of the hook is appropriate for the bait, I don't find much use for light wire hooks outside of panfish these days.
2/0 or 3/0 EWG if t-rigged
For a bait of this size I feel there are only downsides to using a light wire hook. I would only use light wire on a 3 inch or smaller bait, in an area with little to no thick cover and on 8lb test or lighter. If I was fishing in saltwater, I would also want to be fishing in an area where a larger more aggressive bycatch is fairly unlikely...and I'd still just rather use a heavy wire hook if possible. As long as the size of the hook is appropriate for the bait, I don't find much use for light wire hooks outside of panfish these days.
-
- Senior Angler
- Posts: 171
- Joined: Fri Oct 26, 2007 9:49 pm
- Location: Queens NY
Re: Rigging Grubs
oops wrote:Bullet or darter head with 1/0 to 4/0 hook
2/0 or 3/0 EWG if t-rigged
For a bait of this size I feel there are only downsides to using a light wire hook. I would only use light wire on a 3 inch or smaller bait, in an area with little to no thick cover and on 8lb test or lighter. If I was fishing in saltwater, I would also want to be fishing in an area where a larger more aggressive bycatch is fairly unlikely...and I'd still just rather use a heavy wire hook if possible. As long as the size of the hook is appropriate for the bait, I don't find much use for light wire hooks outside of panfish these days.
So t-rigged.. You throw into weeds?
Re: Rigging Grubs
When fishing rocky free flowing rivers for smallies i rig 5" kalins on a 1/8- 3/16 oz. ball head jigs. Mostly 3/16
For greenies in lakes i'll t rig 5" kalins on a GAMMI 3/0 EWG hook with a 1/8-3/16oz bullet sinker left to slide freely.
For greenies in lakes i'll t rig 5" kalins on a GAMMI 3/0 EWG hook with a 1/8-3/16oz bullet sinker left to slide freely.
- Bassmar
- Platinum Angler
- Posts: 969
- Joined: Sun Feb 27, 2011 2:42 am
- Location: Cape Town, South Africa
Re: Rigging Grubs
I fish 4" and 5" grubs in wood cover. Rig on Gammy or Hyabusa 3/0 and 4/0 EWG's.
Re: Rigging Grubs
Do you guys rig your grubs with the tail up or tail down? Or does it make no difference to you? I usually rig mine tail down.
Re: Rigging Grubs
tail down, the tail can get tangled on an open hook easier when rigged tail up. ive heard that the bait has better action on the drop when rigged tail down but i dont know how true that is
Re: Rigging Grubs
X2oops wrote:tail down, the tail can get tangled on an open hook easier when rigged tail up. ive heard that the bait has better action on the drop when rigged tail down but i dont know how true that is
Re: Rigging Grubs
Kalin's says to rig them tail down on a jig head, and I do. Definitely less likely to have the tail grab the hook, but it also gives a clean flow of water to the tail--no hook eye, knot, or hook to create "turbulence" so I think the tail is slightly more free to move.
-
- Elite Angler
- Posts: 426
- Joined: Sun Mar 27, 2011 1:25 pm
Re: Rigging Grubs
You're trying way too hard...Randingo wrote:it also gives a clean flow of water to the tail--no hook eye, knot, or hook to create "turbulence" so I think the tail is slightly more free to move.
Rig it tail up or tail down until the hook tears up that side then rig it the opposite way. Both options catch bass.
oe
Re: Rigging Grubs
You're right! But I still think they work better when rigged with the tail down. Not that they don't catch fish tail up, but they fish more efficiently tail down.OkobojiEagle wrote:(*,) You're trying way too hard...
oe