1016 spool

littlefish · Post by **littlefish** » Mon Feb 08, 2021 6:44 pm

T3 1016 spool is same as ryoga 1016 spool?
I need a new spool for my td-ito,please advise

Post by **hoohoorjoo** » Mon Feb 08, 2021 7:09 pm

No, the t3 1016 spool is a little lighter.

littlefish · Post by **littlefish** » Mon Feb 08, 2021 7:47 pm

T3 1016 spool is really hard to find these days. Any suggestions?

I have sv103, sv105 and nrc001pg

jvelth74 · Post by **jvelth74** » Tue Feb 09, 2021 2:56 am

T3 = Light standard depth Magforce-Z spool?

How about RCS 1016G1 spool instead of T3 spool?

SSS · Post by **SSS** » Tue Feb 09, 2021 5:22 am

I've used both a bunch. The Ryoga's spool is excellent, and for some reason i never seen anybody talking about it.

jvelth74 · Post by **jvelth74** » Tue Feb 09, 2021 5:54 am

Ryoga 1016 spool should be very similar to RCS 1016G1, I think. Same material and both looks like same. Inductor looks same and I think also springs are same.

Post by **hoohoorjoo** » Tue Feb 09, 2021 5:58 am

hoohoorjoo wrote: ↑
Mon Feb 08, 2021 7:09 pm
No, the t3 1016 spool is a little lighter.

By lighter, I mean by less than 2 grams, iirc.

littlefish · Post by **littlefish** » Tue Feb 09, 2021 9:14 am

jvelth74 wrote: ↑
Tue Feb 09, 2021 2:56 am
T3 = Light standard depth Magforce-Z spool?

How about RCS 1016G1 spool instead of T3 spool?

RCS 1016G1 is steez a stock spool?
how is it compare to t3 1016 spool?

jvelth74 · Post by **jvelth74** » Tue Feb 09, 2021 9:29 am

littlefish wrote: ↑
Tue Feb 09, 2021 9:14 am
RCS 1016G1 is steez a stock spool?

No it isn't but surely it's close to that. RCS spools are tuning spools.
My Alphas ct arrived with sticky inductor. I didn't want to send it back to Japan. I ordered RCS spool to it, hoping that will be a little lighter. Actually RCS spool is 0.1 or 0.2 grams heavier than standard one. I think it's exactly same spool but a little thicker (and different colour) paint.

littlefish wrote: ↑
Tue Feb 09, 2021 9:14 am
how is it compare to t3 1016 spool?

I don't know, I haven't tried.

LowRange · Post by **LowRange** » Tue Feb 09, 2021 1:30 pm

My stock LIN10 spools feel overbraked but that could be the magnets. MB reels sometimes have stronger magnets than the Daiwas they are developed from. My T3 1016 spool looks and feels like my LIN10 spools but it is a freak of nature broken spool that is unusablly wild in any reel except my LINs where it needs the brake at 15 to be tamed and then it just dumps the spool of line with no effort. It now resides in a LIN10 Black Jungle on an Orochi X4 711 for deep crank use. Other spools get swapped in for pitching plastics and jigs if only to switch to flouro. The 711 is crazy versatile. Family pic.

Loafer · Post by **Loafer** » Thu Feb 11, 2021 7:37 am

Hello, Friend!
Do you looking fo 34 mm spool? For what: PE line or Fluorocarbon?
For PE line you can look at this 34 mm spool with fixed inductor: viewtopic.php?f=65&t=80168

1016 spool

1016 spool

Re: 1016 spool

Re: 1016 spool

Re: 1016 spool

Re: 1016 spool

Re: 1016 spool

Re: 1016 spool

Re: 1016 spool

Re: 1016 spool

Re: 1016 spool

Re: 1016 spool