gear machining
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
gear machining
Can the same equipment and setups be used for manufacturing brass gears as is used to manuf. alum. gears?
Re: gear machining
Yes. The feed and speed will be different. Aluminum is softer then brass. Plus brass is abrasive. Your cutting tools will break down faster with brass.
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Re: gear machining
Thanks.fishonsc wrote:Yes. The feed and speed will be different. Aluminum is softer then brass. Plus brass is abrasive. Your cutting tools will break down faster with brass.
I thought the aluminum used for baitcaster main gears was harder than the brass used in main gears, and that way why brass gears seem so much smoother.
Are the aluminum gears hardened after they are manufactured?
-
- TT Moderator
- Posts: 6805
- Joined: Mon Feb 28, 2011 1:56 pm
- Location: Oxford GA
Re: gear machining
The aluminum gears are tempered on most reels-that is, if the reel is designed to last for more than 1 season. Some are just anodized to make the outer surface harder by concentrating molecules there. The best is a combination of high-tensile 7000 series aluminum alloy, then hard-anodizing the gear after machining.mark poulson wrote:Thanks.fishonsc wrote:Yes. The feed and speed will be different. Aluminum is softer then brass. Plus brass is abrasive. Your cutting tools will break down faster with brass.
I thought the aluminum used for baitcaster main gears was harder than the brass used in main gears, and that way why brass gears seem so much smoother.
Are the aluminum gears hardened after they are manufactured?
Try not to let your mind wander. It is much too small to be outside unsupervised.
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Re: gear machining
Thanks.hoohoorjoo wrote:The aluminum gears are tempered on most reels-that is, if the reel is designed to last for more than 1 season. Some are just anodized to make the outer surface harder by concentrating molecules there. The best is a combination of high-tensile 7000 series aluminum alloy, then hard-anodizing the gear after machining.mark poulson wrote:Thanks.fishonsc wrote:Yes. The feed and speed will be different. Aluminum is softer then brass. Plus brass is abrasive. Your cutting tools will break down faster with brass.
I thought the aluminum used for baitcaster main gears was harder than the brass used in main gears, and that way why brass gears seem so much smoother.
Are the aluminum gears hardened after they are manufactured?
Re: gear machining
Seems to be hit or miss with alloy gears. The micro gears in my 13 Metanium developed an annoying 'buzz' very quickly with use, while the alloy gears in both my Steez A reels are liquid smooth after heavy use and dozens of large barramundi. Using a Curado K brass drive gear and a stock pinion in the Met transformed it into a super smooth reel.