Steez a tension knob

Reels are the hottest topic for TackleTour. Everyone wants to know what the latest and greatest is and how they compare to the old guard. What's the best for light stuff, or what's your suggestion for heavy cover. Do we really need different retrieve ratios? It's all in here.
Jmoua86
Angler
Angler
Posts: 24
Joined: Tue Nov 08, 2016 7:02 am

Steez a tension knob

Postby Jmoua86 » Tue Jun 12, 2018 12:21 am

Accidentally turned the spool tension knob, how to reset to factory settings? Thanks guys

rajiv97
Angler
Angler
Posts: 11
Joined: Sun May 13, 2018 8:12 am

Re: Steez a tension knob

Postby rajiv97 » Tue Jun 12, 2018 4:09 am

Jmoua86 wrote:Accidentally turned the spool tension knob, how to reset to factory settings? Thanks guys


1. Release your clutch and try shaking the spool.
2. If it is shaking, increase the tension bit by bit until it COMPLETELY stops shaking.

If you accidentally tightened your spool instead, when you release the clutch the spool wont shake. So I would advice you to reduce the tension until it starts shaking. And then gradually tightening it again until it stops.

I'm not sure if this is the right way or not, but this is how I do it. Good luck!

Jmoua86
Angler
Angler
Posts: 24
Joined: Tue Nov 08, 2016 7:02 am

Re: Steez a tension knob

Postby Jmoua86 » Tue Jun 12, 2018 7:30 am

Thanks I will try that

User avatar
Cristo
Platinum Angler
Platinum Angler
Posts: 888
Joined: Thu Dec 08, 2016 6:13 am
Location: The Dusty Basin

Re: Steez a tension knob

Postby Cristo » Tue Jun 12, 2018 1:59 pm

Image
"I don't keep track of time, otherwise time will keep track of you" .....Cambo

Polkfish1
Senior Angler
Senior Angler
Posts: 143
Joined: Fri Dec 23, 2016 4:58 pm

Re: Steez a tension knob

Postby Polkfish1 » Tue Jun 12, 2018 5:34 pm

With the sv reels I've fished, I've dailed in the spool tension from the start to the line and lure I was using until I was happy with the casting. I didn't read or realize the stuff about factory settings. I guess I'm the typical dude that doesn't read instructions. That's worked for me fine though

tywithay
Pro Angler
Pro Angler
Posts: 2540
Joined: Mon Apr 25, 2011 1:10 pm

Re: Steez a tension knob

Postby tywithay » Wed Jun 13, 2018 9:43 am

I thought they had the tension too tight from the factory. I loosened mine after the 1st cast.

User avatar
Rippin-lips
Elite Angler
Elite Angler
Posts: 462
Joined: Sat Jul 20, 2013 1:00 pm

Re: Steez a tension knob

Postby Rippin-lips » Wed Jun 13, 2018 10:17 am

Daiwa recommends with sv reels to loosen the cast control cap until there’s a slight wiggle in the spool and then add clicks until the wiggle stops and then back it off 1 click. Since that reel doesn’t have a clicking ccc then dial it back until it wiggles and then turn it until it doesn’t wiggle and then back it off 1mm. Personally I felt it was set a bit tight from factory and on all my reels with sv spools I set it to have a very slight wiggle without the thumb bar being pressed and leave it at that. This video shows what I’m talking about. Start it at 2:40.

https://youtu.be/DoZ0ghlhMrk

iabass8
Elite Angler
Elite Angler
Posts: 514
Joined: Mon Mar 26, 2012 10:07 am

Re: Steez a tension knob

Postby iabass8 » Wed Jun 13, 2018 6:32 pm

My Steez SV TWs have a very tight cast control knob that was preset at the factory. My Steez As cast control knob is not overly snug like the SV TWs. It's easily adjustable. I don't think, at least mine, the Steez A was factory preset or meant to stay snug. It isn't an SV reel.


Return to “Reels”

Who is online

Users browsing this forum: No registered users and 10 guests