Recently received a T3 MX and had a zaion drag star to replace the stock one. Well I took it out to fish, and I found that I could not tighten the drag down enough by hand to actually set the hook on a fish. So I had to keep my thumb on the spool all day, didn't get a bite anyways.
Now, the reel is apart, ready for a good cleaning, spool bearings, and drag replacement.
I'm guessing I need to add a spacer under the star. Anyone dealt with this before? Thanks.
T3 MX with tatula zaion dragstar
-
- Elite Angler
- Posts: 643
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
-
- Pro Angler
- Posts: 1948
- Joined: Sat Aug 29, 2015 1:34 pm
- Location: NW OKC OK USA
Re: T3 MX with tatula zaion dragstar
Yeah, I did with the SS SV. I just added another one of those washers which sit between the springs and the star.
This is the way.
Re: T3 MX with tatula zaion dragstar
I put the same drag star on a 1016 T3. Add another washer similar to the one that goes above the 2 curved drag washers and you'll be good to go.
-
- Elite Angler
- Posts: 643
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
Re: T3 MX with tatula zaion dragstar
Thanks guys.