Hi all,
received my Aldebaran BFS yesterday. I spooled it up with 10# braid and a 8 pound Azuri leader, put it on my Belkei UL (1/32-1/4) and went out to test it.
Here is what I noticed in my 30mins of use:
* Magnetic breaks I had to put to 5-6 and the spool tension knob had to be pretty fixed as well, otherwise I always ended up with a severe backlash.
* Also the way to throw those lighter lures (1/8) had to be very carefully. It was more of a lob cast rather than a overhead.
Distance was good. I compared it against my Spinning 7' rod (1/8- 1/2 oz) and the BFS set up casted slightly further and more accurate.
Is there anything that I can do further increase distance and avoid backlashes?
Thanks all
Some initial probs with Aldebaran BFS
-
- Platinum Angler
- Posts: 1059
- Joined: Sun Nov 13, 2016 4:08 pm
- Hobie-Wan Kenobi
- Pro Angler
- Posts: 3014
- Joined: Tue Apr 08, 2014 8:25 pm
- Location: Michigan (U.P)
- Contact:
Re: Some initial probs with Aldebaran BFS
The reel does prefer a smoother casting motion. I had 2, only have 1 now but, I never had a problem with casting. Try oiling the bearings and spool shaft. Also, take the side plate off and use something magnetic by the magnets for see if your brakes are moving freely.
IG @hobie_wan_kenobi_fishing
-
- Platinum Angler
- Posts: 1059
- Joined: Sun Nov 13, 2016 4:08 pm
Re: Some initial probs with Aldebaran BFS
Thanks, will have a look. I might just need to get used to this new set up and dial everything in. Afterall I was throwing 1/8 oz lures...ccass wrote:The reel does prefer a smoother casting motion. I had 2, only have 1 now but, I never had a problem with casting. Try oiling the bearings and spool shaft. Also, take the side plate off and use something magnetic by the magnets for see if your brakes are moving freely.
-
- TT Pro Angler
- Posts: 2749
- Joined: Thu Dec 20, 2007 2:28 pm
- Location: NorCal
Re: Some initial probs with Aldebaran BFS
Also back your drag way off, and then turn it back up slowly until it's what you want. Too much drag can really affect the cast.
Re: Some initial probs with Aldebaran BFS
There are some extra magnets that come with the reel as well that can be added for better control.
-
- Platinum Angler
- Posts: 1059
- Joined: Sun Nov 13, 2016 4:08 pm
Re: Some initial probs with Aldebaran BFS
Was wondering what these were aboutss30378 wrote:There are some extra magnets that come with the reel as well that can be added for better control.
Added, will try it tomorrow if the weather plays nice.
Re: Some initial probs with Aldebaran BFS
I run 8 magnet in mine, kinda set and forget so I use only the dial. Mine is paired with a volkey68L and #7 fcsniper. The only time I had a bad overrun was user error.
The only problem I had with this reel is that one of the magnet turned bad and it was kinda sticking out and messing with the spool so I had to remove it. Besides that it was one of my fav combo this year, I even just buyed a second one in a nice used state to replace the older platform.
Anyone know where to find the extra magnet in order to replace the one that gone bad and get a few extra at the same time just in case?
The only problem I had with this reel is that one of the magnet turned bad and it was kinda sticking out and messing with the spool so I had to remove it. Besides that it was one of my fav combo this year, I even just buyed a second one in a nice used state to replace the older platform.
Anyone know where to find the extra magnet in order to replace the one that gone bad and get a few extra at the same time just in case?