Steez A Gears
-
- Elite Angler
- Posts: 200
- Joined: Fri Dec 30, 2016 3:52 pm
Steez A Gears
Hi does anyone know if there is any brass gear swaps for the Steez A. I feel like brass gears would be better in saltwater rather than the duraluminum (i think thats how it is spelled) gears. I read on google that aluminum gears corrode a little faster. I am trying to make my reel as saltwater proof as possible. Do you think the 13Fishing concept z bushing things will fit on this reel.
-
- Elite Angler
- Posts: 485
- Joined: Sun Sep 16, 2012 11:05 am
Re: Steez A Gears
There is no brass gear for that reel. As for upgrading the corrosion resistant ball bearings, I think you would kill the performance of that reel.
-
- Senior Angler
- Posts: 179
- Joined: Wed May 25, 2016 7:04 am
Re: Steez A Gears
Old post but...........
I finally got my hands on an A and found the main gears have the exact same center as the older steez/OG Zill. Main gear is an exact swap, But the pinion is another story. Daiwa added liners to each bearing and the yoke is much different.
Pulling the liners and modding a yoke should have us using what ever gearset we please. I'll start a new thread once I get my gears as I'd like a 5.3:1 and Daiwa JDM won't sell a set at this time.
I finally got my hands on an A and found the main gears have the exact same center as the older steez/OG Zill. Main gear is an exact swap, But the pinion is another story. Daiwa added liners to each bearing and the yoke is much different.
Pulling the liners and modding a yoke should have us using what ever gearset we please. I'll start a new thread once I get my gears as I'd like a 5.3:1 and Daiwa JDM won't sell a set at this time.
2012 Stratos 285XL 150 Etec HO
- BARRAMANIAC
- Platinum Angler
- Posts: 1213
- Joined: Thu Apr 20, 2006 10:00 pm
- Location: Townsville , Queensland , Australia
Re: Steez A Gears
Yes there is spanky, I am successfully running a og zillion main gear in a steez a but have to use the steez a pinion.PikeRoadBassn wrote: ↑Fri Oct 27, 2017 11:51 amThere is no brass gear for that reel. As for upgrading the corrosion resistant ball bearings, I think you would kill the performance of that reel.
-
- Platinum Angler
- Posts: 896
- Joined: Sat May 25, 2019 6:27 pm
Re: Steez A Gears
Did you do that to get a certain gear ratio or was the steez A main gear material not durable enough for you?BARRAMANIAC wrote: ↑Sat Jul 27, 2019 2:34 pmYes there is spanky, I am successfully running a og zillion main gear in a steez a but have to use the steez a pinion.PikeRoadBassn wrote: ↑Fri Oct 27, 2017 11:51 amThere is no brass gear for that reel. As for upgrading the corrosion resistant ball bearings, I think you would kill the performance of that reel.
-
- Senior Angler
- Posts: 179
- Joined: Wed May 25, 2016 7:04 am
Re: Steez A Gears
Something we'll need to work on. I'm pulling the sleeves out of my A and see what mods the yoke may need to get the OG gears fitted. I got a tatula yoke in the bin somewhere...............BARRAMANIAC wrote: ↑Sat Jul 27, 2019 2:34 pm
I am successfully running a og zillion main gear in a steez a but have to use the steez a pinion.
2012 Stratos 285XL 150 Etec HO
-
- Elite Angler
- Posts: 200
- Joined: Fri Dec 30, 2016 3:52 pm
Re: Steez A Gears
I need a brass gear for myself, I like brass because I fish mainly saltwater. Can somebody link me to the gear they used?
-
- Senior Angler
- Posts: 179
- Joined: Wed May 25, 2016 7:04 am
Re: Steez A Gears
What gear ratio, Left or right handed?Salty Parrot wrote: ↑Sun Jul 28, 2019 5:18 pmI need a brass gear for myself, I like brass because I fish mainly saltwater. Can somebody link me to the gear they used?
2012 Stratos 285XL 150 Etec HO
Re: Steez A Gears
Wouldn’t the morethan pe 19 8.6 bronze gears be a direct fit?
- BARRAMANIAC
- Platinum Angler
- Posts: 1213
- Joined: Thu Apr 20, 2006 10:00 pm
- Location: Townsville , Queensland , Australia
Re: Steez A Gears
I am a tinkerer. just did it to see if it could be done.chrisg_sdcf wrote: ↑Sat Jul 27, 2019 9:30 pmDid you do that to get a certain gear ratio or was the steez A main gear material not durable enough for you?BARRAMANIAC wrote: ↑Sat Jul 27, 2019 2:34 pmYes there is spanky, I am successfully running a og zillion main gear in a steez a but have to use the steez a pinion.PikeRoadBassn wrote: ↑Fri Oct 27, 2017 11:51 amThere is no brass gear for that reel. As for upgrading the corrosion resistant ball bearings, I think you would kill the performance of that reel.
- BARRAMANIAC
- Platinum Angler
- Posts: 1213
- Joined: Thu Apr 20, 2006 10:00 pm
- Location: Townsville , Queensland , Australia
Re: Steez A Gears
I fish the Steez A's in salt and have had no issues with the alloy gear, I only put a brass gear into one of mine to see if it could be done.Salty Parrot wrote: ↑Sun Jul 28, 2019 5:18 pmI need a brass gear for myself, I like brass because I fish mainly saltwater. Can somebody link me to the gear they used?
- BARRAMANIAC
- Platinum Angler
- Posts: 1213
- Joined: Thu Apr 20, 2006 10:00 pm
- Location: Townsville , Queensland , Australia
- BARRAMANIAC
- Platinum Angler
- Posts: 1213
- Joined: Thu Apr 20, 2006 10:00 pm
- Location: Townsville , Queensland , Australia
Re: Steez A Gears
pretty sure the slot in the pinion where the yoke goes is at different heights for the steez a vs og zillion pinion. but in the og zillion range there is a main gear to match 3 out of the 4 ratios available in the steez A , 5.3:1 from the j dream , 6.3:1 and 7.1:1 I have done the mod with a 6.3:1 og zillion main gear and steez A pinion and it is nice and smooth, I removed the o rings from the main shaft and use 2 carbontex washers , one under and one in the main gear and use the steez A drag plate minus the clicker pawl and spring.jjbassnforfun wrote: ↑Sun Jul 28, 2019 5:22 amSomething we'll need to work on. I'm pulling the sleeves out of my A and see what mods the yoke may need to get the OG gears fitted. I got a tatula yoke in the bin somewhere...............BARRAMANIAC wrote: ↑Sat Jul 27, 2019 2:34 pm
I am successfully running a og zillion main gear in a steez a but have to use the steez a pinion.
-
- Senior Angler
- Posts: 179
- Joined: Wed May 25, 2016 7:04 am
Re: Steez A Gears
Why not use the stacked drag from the OG?BARRAMANIAC wrote: ↑Mon Jul 29, 2019 5:02 pmpretty sure the slot in the pinion where the yoke goes is at different heights for the steez a vs og zillion pinion. but in the og zillion range there is a main gear to match 3 out of the 4 ratios available in the steez A , 5.3:1 from the j dream , 6.3:1 and 7.1:1 I have done the mod with a 6.3:1 og zillion main gear and steez A pinion and it is nice and smooth, I removed the o rings from the main shaft and use 2 carbontex washers , one under and one in the main gear and use the steez A drag plate minus the clicker pawl and spring.jjbassnforfun wrote: ↑Sun Jul 28, 2019 5:22 amSomething we'll need to work on. I'm pulling the sleeves out of my A and see what mods the yoke may need to get the OG gears fitted. I got a tatula yoke in the bin somewhere...............BARRAMANIAC wrote: ↑Sat Jul 27, 2019 2:34 pm
I am successfully running a og zillion main gear in a steez a but have to use the steez a pinion.
I want mine to be 5.3:1 and have a set of gears order. I don't have the OEM pinion and they aren't selling them yet(for repair only). I'm thinking a Tat yoke has the similar slot location and might be mod-able to get the OG gear set installed? Its my next project after the Coastal-TW 200 drag mod...........
2012 Stratos 285XL 150 Etec HO
-
- Platinum Angler
- Posts: 896
- Joined: Sat May 25, 2019 6:27 pm
Re: Steez A Gears
Thanks. Recently bought a steez A and really didn't want to find out the gears weren't durable. I primarily fish freshwater for bass so it doesn't need to stand up to saltwater fishing conditions but I definitely like my equipment to last.BARRAMANIAC wrote: ↑Mon Jul 29, 2019 4:54 pmI am a tinkerer. just did it to see if it could be done.chrisg_sdcf wrote: ↑Sat Jul 27, 2019 9:30 pmDid you do that to get a certain gear ratio or was the steez A main gear material not durable enough for you?BARRAMANIAC wrote: ↑Sat Jul 27, 2019 2:34 pmYes there is spanky, I am successfully running a og zillion main gear in a steez a but have to use the steez a pinion.PikeRoadBassn wrote: ↑Fri Oct 27, 2017 11:51 amThere is no brass gear for that reel. As for upgrading the corrosion resistant ball bearings, I think you would kill the performance of that reel.
I've also been wondering if I should have gone with the new morethan instead of the steez A but I'm sure the A will work well for me.