Shimano bearing part# for 3x7x3mm

Have a question regarding an existing Shimano product? Talk directly to an official representative from Shimano!
kosiko
Angler
Angler
Posts: 22
Joined: Thu May 11, 2017 2:46 am

Shimano bearing part# for 3x7x3mm

Postby kosiko » Sat Apr 07, 2018 4:42 am

I am helping a friend to buy shimano stock spool bearing for 01 calcutta conquest 50.

For this reel and othet small reels, shimano uses a small bearing 3x7x3 at the tension knob side.

Check the schematic from shimanon US site but cannot find a part# just for this bearing, but a whole spool assembly including the bearing.


Can someone show a part# for 3x7x3 bearing only so we can order directly from shimano?

Thanks

Ben
Ben ...the shimano fan

User avatar
TommyG
Elite Angler
Elite Angler
Posts: 650
Joined: Mon Nov 12, 2012 8:02 am
Location: Midlothian, Illinois

Re: Shimano bearing part# for 3x7x3mm

Postby TommyG » Sun Apr 08, 2018 7:14 am

Did you look at Boca?

kosiko
Angler
Angler
Posts: 22
Joined: Thu May 11, 2017 2:46 am

Re: Shimano bearing part# for 3x7x3mm

Postby kosiko » Sun Apr 08, 2018 3:25 pm

Tommy,

Thanks for reply my 1st post.

Yeah, I believe boca or hedgehog has the size we need but prefer the stock beering. If we can't source it from shimano then we have to go to these brands
Ben ...the shimano fan

User avatar
Bantam1
Manufacturer Support
Manufacturer Support
Posts: 4738
Joined: Thu Jun 28, 2007 10:44 am

Re: Shimano bearing part# for 3x7x3mm

Postby Bantam1 » Mon Apr 16, 2018 5:21 am

I need to know OD x ID x W to check my bearing chart. I know some of the bearings we never received a part number or replacement bearings for due to low demand.

kosiko
Angler
Angler
Posts: 22
Joined: Thu May 11, 2017 2:46 am

Re: Shimano bearing part# for 3x7x3mm

Postby kosiko » Mon Apr 16, 2018 11:13 am

Bantam1 wrote:I need to know OD x ID x W to check my bearing chart. I know some of the bearings we never received a part number or replacement bearings for due to low demand.


Hi Bantam,

the dimension is on the title, 3 (ID) x7 (OD) x3 (W) mm, thank you! :D
Ben ...the shimano fan

User avatar
Bantam1
Manufacturer Support
Manufacturer Support
Posts: 4738
Joined: Thu Jun 28, 2007 10:44 am

Re: Shimano bearing part# for 3x7x3mm

Postby Bantam1 » Tue Apr 17, 2018 5:05 am

I checked my bearing size list and can't find any bearing that matches the dimensions you listed. This is one of the bearings we never received a part number for and required the spool to be replaced if it needed a bearing. In this case you will have to use an aftermarket bearing unfortunately. The closest bearing we have in size is 7 x 4 x 2.5 (OD x ID x W).

We have bearings for the CTE50GT.

kosiko
Angler
Angler
Posts: 22
Joined: Thu May 11, 2017 2:46 am

Re: Shimano bearing part# for 3x7x3mm

Postby kosiko » Tue Apr 17, 2018 1:34 pm

Bantam1 wrote:I checked my bearing size list and can't find any bearing that matches the dimensions you listed. This is one of the bearings we never received a part number for and required the spool to be replaced if it needed a bearing. In this case you will have to use an aftermarket bearing unfortunately. The closest bearing we have in size is 7 x 4 x 2.5 (OD x ID x W).

We have bearings for the CTE50GT.


Bantam,

could you help to double check if BNT2810 is the same size I am looking for? it's from CTE50GT I believe.

thanks

Ben
Ben ...the shimano fan

User avatar
Zimbass
Elite Angler
Elite Angler
Posts: 727
Joined: Fri Jul 27, 2012 9:17 am
Location: Zimbabwe

Re: Shimano bearing part# for 3x7x3mm

Postby Zimbass » Tue Apr 17, 2018 8:39 pm

The part number BNT2810 is the 3x7x3 spool bearing from under the cast control cap of the CTE50GT.

https://www.ebay.com/itm/Shimano-Ball-B ... 2930661648

User avatar
Bantam1
Manufacturer Support
Manufacturer Support
Posts: 4738
Joined: Thu Jun 28, 2007 10:44 am

Re: Shimano bearing part# for 3x7x3mm

Postby Bantam1 » Wed Apr 18, 2018 5:07 am

That bearing is discontinued.

kosiko
Angler
Angler
Posts: 22
Joined: Thu May 11, 2017 2:46 am

Re: Shimano bearing part# for 3x7x3mm

Postby kosiko » Wed Apr 18, 2018 6:42 am

Zimbass wrote:The part number BNT2810 is the 3x7x3 spool bearing from under the cast control cap of the CTE50GT.

https://www.ebay.com/itm/Shimano-Ball-B ... 2930661648


Thanks
Ben ...the shimano fan

kosiko
Angler
Angler
Posts: 22
Joined: Thu May 11, 2017 2:46 am

Re: Shimano bearing part# for 3x7x3mm

Postby kosiko » Wed Apr 18, 2018 6:42 am

Bantam1 wrote:That bearing is discontinued.


Oops... too bad.. seems we have to get after market bearings.

Thank you Bantam
Ben ...the shimano fan


Return to “Shimano Product Support”

Who is online

Users browsing this forum: No registered users and 3 guests