Page 1 of 1

Chronarch MGL spool bearing

Posted: Thu Jan 18, 2018 11:31 am
by attila
Hello Bantam kind of new to the forum
I have had the new Chronarch now for a few months, and wanted to clean the spool bearings
I have noticed that they are seal.
I have a pair of the ARB from a previous Chronarch B which are open much easier to clean
is the quality the quality the same ? I don't want to use ceramic cause the reel is reel quite
and I don't want to change that about it. Unless you could recommend good SS bearings that are
open like the ARB

Re: Chronarch MGL spool bearing

Posted: Thu Jan 18, 2018 12:25 pm
by Bantam1
The BNT2927 can be used for the the spool. If you are using this reel in freshwater, there really isn't a need to deep clean the bearings. Just add a drop of our oil to each bearing and it will perform well for many years.

Re: Chronarch MGL spool bearing

Posted: Thu Jan 18, 2018 1:22 pm
by attila
Bantam1 wrote:The BNT2927 can be used for the the spool. If you are using this reel in freshwater, there really isn't a need to deep clean the bearings. Just add a drop of our oil to each bearing and it will perform well for many years.

Thank you Bantam so the BNT2927 is the number for the ARB bearing ?

Re: Chronarch MGL spool bearing

Posted: Thu Jan 18, 2018 1:51 pm
by Bantam1
Yes that is the number for the open style ARB bearing.

Re: Chronarch MGL spool bearing

Posted: Mon Jan 22, 2018 10:38 pm
by DirtyD64
Will acetone hurt them??? Kinda worried right now, don't wanna bury my new reel in the backyard...

Re: Chronarch MGL spool bearing

Posted: Tue Jan 23, 2018 5:05 am
by Bantam1
Acetone should not hurt the bearing. I would not soak it for hours, but you can soak it for a little while to clean the bearing if that's what you are in to.

Re: Chronarch MGL spool bearing

Posted: Sat Jan 27, 2018 11:43 am
by brownhl
Try CRC Electronic Cleaner. It comes in a spray can with the red tube insert. It is non corrosive, removes grease and oil in seconds, dries really fast and leaves no residue. You also do not have to worry about blowing yourself up. I put my bearings in a tiny food strainer wire basket, step outdoors an blast away for less than a minute. Great to have on hand for the boat. Walmart sells it.

Re: Chronarch MGL spool bearing

Posted: Thu Feb 08, 2018 8:28 am
by attila
brownhl wrote:Try CRC Electronic Cleaner. It comes in a spray can with the red tube insert. It is non corrosive, removes grease and oil in seconds, dries really fast and leaves no residue. You also do not have to worry about blowing yourself up. I put my bearings in a tiny food strainer wire basket, step outdoors an blast away for less than a minute. Great to have on hand for the boat. Walmart sells it.
I went to Walmart this morning I found CRC electronic cleaner that said either QD or DQ on the can is that the one
you are talking about?

Re: Chronarch MGL spool bearing

Posted: Sun Feb 11, 2018 9:09 am
by brownhl
Yes, it works wonders in cleaning bearings and evaporates quickly with no residue. Great to keep on the boat also.