Chronarch MGL line pawl
Chronarch MGL line pawl
The cap on the pawl of my MGL is loose.
Since it sits under the front bar of the reel I am unable to get in there with a screw driver to make it tight.
Does it matter if its loose.
Since it sits under the front bar of the reel I am unable to get in there with a screw driver to make it tight.
Does it matter if its loose.
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Chronarch MGL line pawl
Ok So what do I have to do to fix it take the reel apart just to make the cap tight ?
-
- Pro Angler
- Posts: 1513
- Joined: Fri May 08, 2015 11:43 pm
- Location: Gold Coast, Queensland. Australia
Re: Chronarch MGL line pawl
Rubber glove for dishwashing
Pair of needle nose
Pull up the two fingers over the needle nose pliers jaws
Gently grip the cylinder wall of the pawl cap and rotate it clockwise to tighten - while not crushing it - only needs light pressure to seat it home.
Pair of needle nose
Pull up the two fingers over the needle nose pliers jaws
Gently grip the cylinder wall of the pawl cap and rotate it clockwise to tighten - while not crushing it - only needs light pressure to seat it home.
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Re: Chronarch MGL line pawl
Or you can put duct tape on the jaws.Slazmo wrote:Rubber glove for dishwashing
Pair of needle nose
Pull up the two fingers over the needle nose pliers jaws
Gently grip the cylinder wall of the pawl cap and rotate it clockwise to tighten - while not crushing it - only needs light pressure to seat it home.
-
- Pro Angler
- Posts: 1513
- Joined: Fri May 08, 2015 11:43 pm
- Location: Gold Coast, Queensland. Australia
Re: Chronarch MGL line pawl
Or you could just buy a jar of plasti-dip and dip the jaws.mark poulson wrote:Or you can put duct tape on the jaws.
Re: Chronarch MGL line pawl
It needs to be tight, but do not crush it or over-tighten it.
Re: Chronarch MGL line pawl
Are we talking about the cap with the slot o fit a screwdriver in ? or the small plastic barrel underneath ?
That I can turn with a finger, but it turns forever doesn't get tight.
Bantam I like Shimano reels but this is the 3rd MGL ,why so many problems with these reels.
That I can turn with a finger, but it turns forever doesn't get tight.
Bantam I like Shimano reels but this is the 3rd MGL ,why so many problems with these reels.
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Chronarch MGL line pawl
Im kinda upset that this was the end of that. There was soo much potential here.Slazmo wrote:Or you could just buy a jar of plasti-dip and dip the jaws.mark poulson wrote:Or you can put duct tape on the jaws.
<")))><{
Re: Chronarch MGL line pawl
I am with you man
I will probably return the reel and go Daiwa
I will probably return the reel and go Daiwa
Re: Chronarch MGL line pawl
We haven't seen many come back. I wonder why you have had so many issues? If the cap is turning and not getting tight I suspect one of two things. Either the cap is stripped, or there is a crack.
Re: Chronarch MGL line pawl
Can you clarify which part are you actually calling the cap ?
The metal part with the screwdriver slot or the the plastic barrel that is just underneath that metal part?
Or that whole piece. Please let me know.
I don't know why I am having these issues. The first one was the drag as I wrote about, the second one started off smooth
but got rough real quick like a week or 3 times fishing with it. This is my 3rd. Its still relatively smooth, however not as smooth as when I first got it which was a month ago. And now the problem with the pawl.
You tell me. I treat all of my reels with white gloves, I see others that fish from shore when they catch a fish, they lay the rod and reel on the ground, I never do that, I am always afraid to get dirt inside it.
So I am doing my part to protect them.
I still have a CH101B and D7 that are flawless. So I don't know what is going on, but I know its not something that I am doing.
Its the people who assemble them, or the quality of the components. That is what you guys should be looking into.
The reel says made in Japan, you mean assembled there that is what the disclaimer should say.
The metal part with the screwdriver slot or the the plastic barrel that is just underneath that metal part?
Or that whole piece. Please let me know.
I don't know why I am having these issues. The first one was the drag as I wrote about, the second one started off smooth
but got rough real quick like a week or 3 times fishing with it. This is my 3rd. Its still relatively smooth, however not as smooth as when I first got it which was a month ago. And now the problem with the pawl.
You tell me. I treat all of my reels with white gloves, I see others that fish from shore when they catch a fish, they lay the rod and reel on the ground, I never do that, I am always afraid to get dirt inside it.
So I am doing my part to protect them.
I still have a CH101B and D7 that are flawless. So I don't know what is going on, but I know its not something that I am doing.
Its the people who assemble them, or the quality of the components. That is what you guys should be looking into.
The reel says made in Japan, you mean assembled there that is what the disclaimer should say.
Re: Chronarch MGL line pawl
PM me if you're switching sides, I bought a second of what we spoke of before. I sold some more old equipment, possibly going to buy a 3rd now. I really still wanna try a Chronarch MGL, but it scares me, seems you've had some issues. I still get interested in the Shimano though, just picking one up at academy it feels very sleek and tight (thumb bar doesn't wiggle a bit, very good engagement, smooth cranking, etc.)... I just don't want to be fooled though if there's a chance something might go wrong.Pegasus wrote:Can you clarify which part are you actually calling the cap ?
The metal part with the screwdriver slot or the the plastic barrel that is just underneath that metal part?
Or that whole piece. Please let me know.
I don't know why I am having these issues. The first one was the drag as I wrote about, the second one started off smooth
but got rough real quick like a week or 3 times fishing with it. This is my 3rd. Its still relatively smooth, however not as smooth as when I first got it which was a month ago. And now the problem with the pawl.
You tell me. I treat all of my reels with white gloves, I see others that fish from shore when they catch a fish, they lay the rod and reel on the ground, I never do that, I am always afraid to get dirt inside it.
So I am doing my part to protect them.
I still have a CH101B and D7 that are flawless. So I don't know what is going on, but I know its not something that I am doing.
Its the people who assemble them, or the quality of the components. That is what you guys should be looking into.
The reel says made in Japan, you mean assembled there that is what the disclaimer should say.
Are you normally used to higher end (+$400) reels? Just a question...
Re: Chronarch MGL line pawl
The Chronarch MGL is made in Japan with parts made in Japan and assembled by Japanese workers. There is no change in how we build the reels.
It's hard to see what is going on via a web forum. The pawl cap is the piece that is slotted for the screwdriver. There could be an extra shim for the pawl preventing the cap from bottoming out like it is supposed to. Since I can't see your reel it will be hard to say exactly what the issue is.
Since you have had a few issues, I would prefer to see the reel in person. Send me a PM with your info and I will send you a shipping label. I personally will inspect and repair the reel. I will also share my findings with our in house QC engineer. I truly suspect the issue is something very small. I will go over the entire reel and make sure it is perfect in every way before you get it back.
It's hard to see what is going on via a web forum. The pawl cap is the piece that is slotted for the screwdriver. There could be an extra shim for the pawl preventing the cap from bottoming out like it is supposed to. Since I can't see your reel it will be hard to say exactly what the issue is.
Since you have had a few issues, I would prefer to see the reel in person. Send me a PM with your info and I will send you a shipping label. I personally will inspect and repair the reel. I will also share my findings with our in house QC engineer. I truly suspect the issue is something very small. I will go over the entire reel and make sure it is perfect in every way before you get it back.
Re: Chronarch MGL line pawl
Thank you for offering to help. I just don't feel comfortable owning a brand new reel a month old , that needs to be taken apart.
I am just going to return it.
I am just going to return it.