Hi all
Having a bit of issues with my Daiwa TD-Z Ito and its drag. I'm new to reel upgrades and just upgraded the drag to Carbontex on the TD-Z. I re-assembled the reel, and now I have a problem where when the drag is tightened, the reel becomes stiff to wind. This stiffness increases as the drag is turned up, however is fine (normal to wind) on low drag settings. Does anyone know where I've gone wrong?
Thanks in advance, Tim
TD-Z drag issue
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: TD-Z drag issue
Sounds to me like you have something internally not set correctly. Maybe something that is riding on the crankshaft.
<")))><{
Re: TD-Z drag issue
Sounds to me like you have click leaf spring holder (looks like a cup) upside down. I bought a Fuego with this same issue. Reversed it to have the "cup" facing up and it's fine. If it is facing down, you are most likely having it dig into the rim and cause friction when reeling with the drag tightened. When it is loose, it backs off the rim of the side plate and there is no more friction. Really a simple fix if that is the issue. Hope this helps. Best wishes on the water.
It is part #86 here:
http://schematics.mikesreelrepair.com/a ... C_105H.pdf
It is part #86 here:
http://schematics.mikesreelrepair.com/a ... C_105H.pdf
Re: TD-Z drag issue
There's a tiny flat washer that sits right above the bearing resting on top of the AR bearing and below the clicking drag. If you don't have this washer, tightening down the drag will cause the reel to do what yours is doing. Worth looking into.