Loose spool on revo
-
- Elite Angler
- Posts: 477
- Joined: Fri Dec 12, 2014 8:38 am
Loose spool on revo
I'm cleaning a revo and customer says he has trouble getting enough spool tension. I checked schematic and everything is in proper place. What should I do? Did the spacers in the tension cap compress over time?
-
- Elite Angler
- Posts: 485
- Joined: Sun Sep 16, 2012 11:05 am
Re: Loose spool on revo
What model REVO? Full shaft or half shaft? Any indentations on the spool spacers in the side plate or cast cap?
-
- Elite Angler
- Posts: 477
- Joined: Fri Dec 12, 2014 8:38 am
Re: Loose spool on revo
It's a revo sx. The black one. Gen 2 I believe. Half shaft. There did seem to be a divot in the cork spacer in the tension cap. I'll order a new one and try that.
-
- Elite Angler
- Posts: 485
- Joined: Sun Sep 16, 2012 11:05 am
Re: Loose spool on revo
And the one in the side plate?
-
- Elite Angler
- Posts: 477
- Joined: Fri Dec 12, 2014 8:38 am
Re: Loose spool on revo
It seems like the one in the sideplate is in relatively good shape. After I took all the spacers out and cleaned them, then reinstalled I can get the spool tension decently tight. I need to order a few other parts from berkley and I'll order new spacers as they're prolly cheap and maybe the old ones suffered from compression. It's an issue with shimano I've never had to deal with before. But they seem to have tighter tolerances and better conformity than abu reels.