Steez A and Megabass IS Bearing Size
Steez A and Megabass IS Bearing Size
Does anyone know spool and sideplate bearing size for these 2 reels.
I believe they are both 1150 and 1030, but wanted to make sure.
I believe they are both 1150 and 1030, but wanted to make sure.
- Loafer
- Elite Angler
- Posts: 380
- Joined: Wed Jul 08, 2015 4:23 pm
- Location: Russian Federation
- Contact:
Re: Steez A and Megabass IS Bearing Size
I saw DIY stainless steel/ceramic ball bearings on aliexpress and there is information about it.
DAIWA:3*10*4 mm +3*10*4 mm
2017 version STEEZ A TW
2016 version STEEZ SV TW
STEEZ LTD SV
STEEZ SV
DAIWA:3*10*4 mm +3*10*4 mm
2017 version STEEZ A TW
2016 version STEEZ SV TW
STEEZ LTD SV
STEEZ SV
-
- Elite Angler
- Posts: 485
- Joined: Sun Sep 16, 2012 11:05 am
Re: Steez A and Megabass IS Bearing Size
You are correct. Both reels take a 3x10x4 in the sideplate and a 5x11x4 on the spool
Re: Steez A and Megabass IS Bearing Size
Spend the extra $ and buy premium ones ...like hedgehog.Loafer wrote:I saw DIY stainless steel/ceramic ball bearings on aliexpress and there is information about it.
DAIWA:3*10*4 mm +3*10*4 mm
2017 version STEEZ A TW
2016 version STEEZ SV TW
STEEZ LTD SV
STEEZ SV
- Loafer
- Elite Angler
- Posts: 380
- Joined: Wed Jul 08, 2015 4:23 pm
- Location: Russian Federation
- Contact:
Re: Steez A and Megabass IS Bearing Size
Hello, Friend!tditox4 wrote:Spend the extra $ and buy premium ones ...like hedgehog.
Thanx for advice, but i completely satisfied stock ball bearings of my reels. I just mentioned aliexpress as website where i saw dimensions.
Re: Steez A and Megabass IS Bearing Size
PikeRoadBassn wrote:You are correct. Both reels take a 3x10x4 in the sideplate and a 5x11x4 on the spool
Thank you sir! The info I was looking for!
- BARRAMANIAC
- Platinum Angler
- Posts: 1213
- Joined: Thu Apr 20, 2006 10:00 pm
- Location: Townsville , Queensland , Australia
Re: Steez A and Megabass IS Bearing Size
Yep the stock bearings are very good once flushed out . they tend to be over lubed from factory. I remove a shield flush out bearing with acetone and then treat with TSI-321 and have found no need to upgrade bearings since doing this.Loafer wrote:Hello, Friend!tditox4 wrote:Spend the extra $ and buy premium ones ...like hedgehog.
Thanx for advice, but i completely satisfied stock ball bearings of my reels. I just mentioned aliexpress as website where i saw dimensions.