BFS bearing 4x7x2.5 (Shimano knob size)

[Hobie-Wan Kenobi]

I am looking for a BFS bearing in the size 4x7x2.5 for a spool. Any help is appreciated. Thanks

[PikeRoadBassn]

What spool is it? I’m unaware of a reel that takes that size bearing for a spool.

[Hobie-Wan Kenobi]

What spool is it? I’m unaware of a reel that takes that size bearing for a spool.

Avail Aldebaran BFS XG 1615r (new shallow spool)

[PikeRoadBassn]

What spool is it? I’m unaware of a reel that takes that size bearing for a spool.

Avail Aldebaran BFS XG 1615r (new shallow spool)

If Im not mistaken, that should be a 3x7x3 bearing. I see where HH Studio shows a 740ZZ, but I feel certainly that is a typo.

If it is indeed a 3x7x3, we have the HH Air in stock here at The Tackle Trap.

[Hobie-Wan Kenobi]

What spool is it? I’m unaware of a reel that takes that size bearing for a spool.

Avail Aldebaran BFS XG 1615r (new shallow spool)

If Im not mistaken, that should be a 3x7x3 bearing. I see where HH Studio shows a 740ZZ, but I feel certainly that is a typo.

If it is indeed a 3x7x3, we have the HH Air in stock here at The Tackle Trap.

The ID needs to be bigger. I tried a 3x7x3 and it would not fit. The Hedgehog site says the spool takes a 7x4x2.5 (typo). I can see if a knob bearing fits to verify the size. The shaft where the bearing goes is definitely bigger than the stock or KTF spool.

[PikeRoadBassn]

What spool is it? I’m unaware of a reel that takes that size bearing for a spool.

Avail Aldebaran BFS XG 1615r (new shallow spool)

If Im not mistaken, that should be a 3x7x3 bearing. I see where HH Studio shows a 740ZZ, but I feel certainly that is a typo.

If it is indeed a 3x7x3, we have the HH Air in stock here at The Tackle Trap.

The ID needs to be bigger. I tried a 3x7x3 and it would not fit. The Hedgehog site says the spool takes a 7x4x2.5 (typo). I can see if a knob bearing fits to verify the size. The shaft where the bearing goes is definitely bigger than the stock or KTF spool.

Please keep me informed on that. I have not yet seen one of these spools, so saying for certain truly is hard. If in fact it is a 4x7x2.5, then ZPI does make a handle knob bearing, and it *should* perform well on it.

[ss30378]

https://www.hedgehog-studio.co.jp/product/439

This is what hh shows is on that spool

[Hobie-Wan Kenobi]

https://www.hedgehog-studio.co.jp/product/439

This is what hh shows is on that spool

That is the size. I was hoping for a BFS bearing.

[Hobie-Wan Kenobi]

What spool is it? I’m unaware of a reel that takes that size bearing for a spool.

Avail Aldebaran BFS XG 1615r (new shallow spool)

If Im not mistaken, that should be a 3x7x3 bearing. I see where HH Studio shows a 740ZZ, but I feel certainly that is a typo.

If it is indeed a 3x7x3, we have the HH Air in stock here at The Tackle Trap.

The ID needs to be bigger. I tried a 3x7x3 and it would not fit. The Hedgehog site says the spool takes a 7x4x2.5 (typo). I can see if a knob bearing fits to verify the size. The shaft where the bearing goes is definitely bigger than the stock or KTF spool.

Please keep me informed on that. I have not yet seen one of these spools, so saying for certain truly is hard. If in fact it is a 4x7x2.5, then ZPI does make a handle knob bearing, and it *should* perform well on it.

Is the an Air BFS bearing that the bearing itself, not counting the housing? If so, I'd just order the 1 bearing and then take the housing off and plug it into my spool

[Hobie-Wan Kenobi]

Bump?

Still looking

[y2k88]

BFS bearing as in one with a housing/collar?

[Hobie-Wan Kenobi]

BFS bearing as in one with a housing/collar?

Yeah. Or really any bearing more capable than the stock bearing.