Tdz 103h spool stuck
Tdz 103h spool stuck
I can't get the spool out of my tdz 103h is there something I'm missing? I should just be able to remove the side plate and have it pop out right?
Re: Tdz 103h spool stuck
It takes some force to get the spool out from these reels.
Re: Tdz 103h spool stuck
The spool pin may be lodged in the pinion. Some fit a little tight, especially in alloy pinions that are worn. Also, you can have trouble removing your spool if you have too much line on your spool.
Re: Tdz 103h spool stuck
K thanks for the information. Ill give er a bit more. I didn't want to mess anything up
- Teal101
- TT Moderator
- Posts: 4884
- Joined: Thu Jul 14, 2011 5:59 am
- Location: Central Washington
- Contact:
Re: Tdz 103h spool stuck
Sometimes the bearing gets stuck in the frame and it takes some force to pop it out. Pushing up on the side of the spool with both your thumbs generally gets it out.
I like TD-Z's
Instagram: teal_101_jdm
Instagram: teal_101_jdm
-
- Platinum Angler
- Posts: 812
- Joined: Sun Jan 15, 2012 6:08 am
- Location: Denver, CO
Re: Tdz 103h spool stuck
Thumb on top and pointer finger on bottom or vice versa...and pull that sucker out. Just be sure to pull in line with the opening to not ding the spool edges.
I got one from Japan that took more force than was comfortable, but it came out. It had years of grease and pond scum caked in there.
Be sure to clean the area back to the paint and it should be.much easier moving forward.
I got one from Japan that took more force than was comfortable, but it came out. It had years of grease and pond scum caked in there.
Be sure to clean the area back to the paint and it should be.much easier moving forward.