Long distance spool for sv103

Here's your chance to speak directly with the TT Gear Crew. Post your questions, comments, experiences regarding tackle maintenance and super tuning
jjbassnforfun
Senior Angler
Senior Angler
Posts: 104
Joined: Wed May 25, 2016 7:04 am

Re: Long distance spool for sv103

Postby jjbassnforfun » Sun Jul 15, 2018 4:34 pm

aqua71 wrote:
jjbassnforfun wrote:
aqua71 wrote:
jjbassnforfun wrote:
aqua71 wrote:Has anyone tried the Steez HLC Spool for bombing DEEP crankbaits in the 3/4oz-1 1/4oz range?

I tried the T3 1016 spool and while I saw a minor improvement, I'm not getting the desired results as I feel it's still over-braked.

The DIY HLC spool?


Unless there's another model I'm not aware of, a BFS spool will NOT work for bombing 1oz crankbaits.

I can nearly spool it with a DT 16 and 10LB mono/flouro. I'm gonna try a RCS1016 which should hold more line.

SLP works shows a hlc spool for the steez, But can't seem to find one!


That is the exact spool I was asking about.


DIY has a HLC spool, This is what confused me. ;)

https://www.aliexpress.com/item/DIY-non ... 54830.html
2012 Stratos 285XL 150 Etec HO

adam lancia
Platinum Angler
Platinum Angler
Posts: 977
Joined: Sat May 10, 2014 12:24 pm
Location: Donkin, Nova Scotia

Re: Long distance spool for sv103

Postby adam lancia » Mon Jul 16, 2018 3:03 am

I'm pretty sure that the Steez HLC cool and the Steez 100 spool are very, very similar.

Aquaftm45
Senior Angler
Senior Angler
Posts: 105
Joined: Sun Dec 17, 2017 7:50 pm

Re: Long distance spool for sv103

Postby Aquaftm45 » Mon Jul 16, 2018 5:58 am

I think there is a little confusion going on here. HLC is a phrase coined by daiwa indicating a spool with a strong spring that is designed to throw 1/2 plus lures a long ways. They make an HLC spool for the tatula and 36MM version for thier HLC reel but should fit into any 1514 Daiwa.
To my knowledge, DIY does not make a spool with similar qualities. Don't confuse a long cast spool with an HLC type spool.

User avatar
Rippin-lips
Elite Angler
Elite Angler
Posts: 462
Joined: Sat Jul 20, 2013 1:00 pm

Re: Long distance spool for sv103

Postby Rippin-lips » Mon Jul 16, 2018 7:33 am

Aquaftm45 wrote:I think there is a little confusion going on here. HLC is a phrase coined by daiwa indicating a spool with a strong spring that is designed to throw 1/2 plus lures a long ways. They make an HLC spool for the tatula and 36MM version for thier HLC reel but should fit into any 1514 Daiwa.
To my knowledge, DIY does not make a spool with similar qualities. Don't confuse a long cast spool with an HLC type spool.



HLC = Hyper Long Cast

Aquaftm45
Senior Angler
Senior Angler
Posts: 105
Joined: Sun Dec 17, 2017 7:50 pm

Re: Long distance spool for sv103

Postby Aquaftm45 » Mon Jul 16, 2018 10:57 am

Mr. Lips is correct. HLC-Hyper Long Cast. Doing a little diligence on the picture provided, it does in fact show this spool on the SLP website, unfortunatly the link does not work. It's an IZE factory spool they are showing and they indicate it as a Hyper Cast Spool. (close enough to HLC). Assuming IZE made this with the heavier spring.

There is a shep in Italy who was selling a 103 w/ a Hyper Cast Spool back in 2011.
https://mercatodellospinning.forumcommu ... t=48103430

These might have came stock or sold aftermarket for the older Steez in a European/Asian market.

Here are some German (2011) and Japanese (2008) friends talking about it in a thread. Just hit translate to read.
If they made it, it has to be out there somewhere. Probobly easier to source the spring and put it in a spool as someone previously mentioned.

http://fishing-for-men.com/showthread.p ... l?p=734681

http://nigeranigera.blog23.fc2.com/blog-entry-91.html

AS always only IZE knows for sure...

jjbassnforfun
Senior Angler
Senior Angler
Posts: 104
Joined: Wed May 25, 2016 7:04 am

Re: Long distance spool for sv103

Postby jjbassnforfun » Mon Jul 16, 2018 4:04 pm

Aquaftm45 wrote: Doing a little diligence on the picture provided, it does in fact show this spool on the SLP website, unfortunately the link does not work.


I picked up a couple of the HLC springs from JT. I suppose one of those in a steez spool is worth a trial??
2012 Stratos 285XL 150 Etec HO

fishingkat
Angler
Angler
Posts: 32
Joined: Mon Dec 12, 2016 6:37 pm

Re: Long distance spool for sv103

Postby fishingkat » Mon Jul 16, 2018 6:29 pm

Not only does a hlc spool have the strong spring.
It also has a short mag z inductor.

The steez hlc spool isn't supposed to be as good as it sounds and I bet the zpi pg would be better.
The og zillion hlc spool is where it's at with hlc spools.

aqua71
Elite Angler
Elite Angler
Posts: 359
Joined: Tue Mar 01, 2011 10:34 am

Re: Long distance spool for sv103

Postby aqua71 » Tue Jul 17, 2018 7:41 pm

So, after some unnecessary confusion, is it safe to assume that no one has used a I'ZE Factory Steez HLC Spool in a SV103 for bombing 3/4oz + crankbaits?

User avatar
Hogsticker2
Pro Angler
Pro Angler
Posts: 5134
Joined: Wed Feb 29, 2012 5:20 pm

Re: Long distance spool for sv103

Postby Hogsticker2 » Tue Jul 17, 2018 8:02 pm

aqua71 wrote:So, after some unnecessary confusion, is it safe to assume that no one has used a I'ZE Factory Steez HLC Spool in a SV103 for bombing 3/4oz + crankbaits?

Probably

jjbassnforfun
Senior Angler
Senior Angler
Posts: 104
Joined: Wed May 25, 2016 7:04 am

Re: Long distance spool for sv103

Postby jjbassnforfun » Wed Jul 18, 2018 3:01 am

aqua71 wrote:So, after some unnecessary confusion,

Thanks

aqua71 wrote: is it safe to assume that no one has used a I'ZE Factory Steez HLC Spool in a SV103 for bombing 3/4oz + crankbaits?


If I find one, Maybe I''ll let ya know, But probably not.................
2012 Stratos 285XL 150 Etec HO

aqua71
Elite Angler
Elite Angler
Posts: 359
Joined: Tue Mar 01, 2011 10:34 am

Re: Long distance spool for sv103

Postby aqua71 » Fri Jul 20, 2018 6:04 pm

I just ordered the Factory Steez HLC Spool today. I'll report back my findings after I receive it and give it a test run.

aqua71
Elite Angler
Elite Angler
Posts: 359
Joined: Tue Mar 01, 2011 10:34 am

Re: Long distance spool for sv103

Postby aqua71 » Tue Jul 31, 2018 10:51 am

As a quick follow-up, I recently received my spool and had the chance to use it over the weekend. All I can say is WOW.... this thing is a rocket launcher! This is exactly what I was looking for for bombing those big deep diving crankbaits.

User avatar
78Staff
Elite Angler
Elite Angler
Posts: 504
Joined: Wed Apr 12, 2006 9:56 am
Location: Florida

Re: Long distance spool for sv103

Postby 78Staff » Thu Aug 02, 2018 7:43 pm

I ordered an Daiwa SLP Works Deep Spool 36mm for a TD-Z100ML from buyee.jp, but when it came in it was a 34mm spoon in a 36mm package. I've started the return process but I may just hang on to it for SV of OG Steez use. It's a fixed inducter 16g with bearing, but other than that don't know much about it. Might be worth keeping, esp if they expect me to pay to ship it back.

User avatar
78Staff
Elite Angler
Elite Angler
Posts: 504
Joined: Wed Apr 12, 2006 9:56 am
Location: Florida

Re: Long distance spool for sv103

Postby 78Staff » Fri Aug 03, 2018 5:19 am

78Staff wrote:I ordered an Daiwa SLP Works Deep Spool 36mm for a TD-Z100ML from buyee.jp, but when it came in it was a 34mm spoon in a 36mm package. I've started the return process but I may just hang on to it for SV of OG Steez use. It's a fixed inducter 16g with bearing, but other than that don't know much about it. Might be worth keeping, esp if they expect me to pay to ship it back.


Well looks like i am keeping it, turns out the package says NOT for 100M/100ML lol. Chalk it up to a translation issue on my end. Oh well, on the bright side I got a nice 34mm Gigas Deep Spool I can surely find a use for :o

User avatar
LowRange
Pro Angler
Pro Angler
Posts: 1552
Joined: Wed Jun 15, 2016 9:18 am

Re: Long distance spool for sv103

Postby LowRange » Fri Aug 03, 2018 2:47 pm

78Staff wrote:
78Staff wrote:I ordered an Daiwa SLP Works Deep Spool 36mm for a TD-Z100ML from buyee.jp, but when it came in it was a 34mm spoon in a 36mm package. I've started the return process but I may just hang on to it for SV of OG Steez use. It's a fixed inducter 16g with bearing, but other than that don't know much about it. Might be worth keeping, esp if they expect me to pay to ship it back.


Well looks like i am keeping it, turns out the package says NOT for 100M/100ML lol. Chalk it up to a translation issue on my end. Oh well, on the bright side I got a nice 34mm Gigas Deep Spool I can surely find a use for :o



I've never heard of that spool. Is it like an SLP version of the TD-Z Big Bait Special spool?


Return to “Maintenance & SuperTuning Q&A”

Who is online

Users browsing this forum: No registered users and 5 guests