Where are the shimanos?
- Bootytrain
- Pro Angler
- Posts: 2449
- Joined: Fri Mar 29, 2013 8:28 am
Re: Where are the shimanos?
Some quick things about the Aldebaran BFS XG Limited..
Comes in a slick black box with red foil lettering
Comes with 2 types of oil, not sure what the difference is between the 2?
Spare brake blocks, red and white
Weighed in at 4.9 oz
The spool weighed in at 9 grams (thought it would be lighter)
The reel is SICK... jet black with a shiny gloss finish.
and wait for it...
THE LIMITED SPOOL FITS THE REGULAR BFS XG
Comes in a slick black box with red foil lettering
Comes with 2 types of oil, not sure what the difference is between the 2?
Spare brake blocks, red and white
Weighed in at 4.9 oz
The spool weighed in at 9 grams (thought it would be lighter)
The reel is SICK... jet black with a shiny gloss finish.
and wait for it...
THE LIMITED SPOOL FITS THE REGULAR BFS XG
Re: Where are the shimanos?
You need to swap the handles and knob, or get another pair for your BFS XG limited. Beautiful stuff
- the hooligan
- Pro Angler
- Posts: 1751
- Joined: Sat Sep 01, 2012 11:25 am
- Location: South Jersey
Re: Where are the shimanos?
Surprised the spool isn't lighter, a little disappointing...
Re: Where are the shimanos?
The spool weight is with the SVS block right? Can't you swap that for a Avail 4 point block?
- Bootytrain
- Pro Angler
- Posts: 2449
- Joined: Fri Mar 29, 2013 8:28 am
Re: Where are the shimanos?
Yeah its the whole spool straight out of the reel. I'm not too worried about the weight of the spool until I get it out on the water and see how it performs. I doubt shimano would bother releasing this unless there was a gain over the standard BFS.
- the hooligan
- Pro Angler
- Posts: 1751
- Joined: Sat Sep 01, 2012 11:25 am
- Location: South Jersey
Re: Where are the shimanos?
Forgot about the brake block. They weigh 1 gram so its closer to an 8gram spool. Not bad.IAY wrote:The spool weight is with the SVS block right? Can't you swap that for a Avail 4 point block?
The ktf spool without bearing and block is 6.2grams. So performance should be pretty similar
- Bootytrain
- Pro Angler
- Posts: 2449
- Joined: Fri Mar 29, 2013 8:28 am
Re: Where are the shimanos?
I wish I had 2 of the same BFS rods so I can test it side by side with the LTZ and the regular BFSthe hooligan wrote:Forgot about the brake block. They weigh 1 gram so its closer to an 8gram spool. Not bad.IAY wrote:The spool weight is with the SVS block right? Can't you swap that for a Avail 4 point block?
The ktf spool without bearing and block is 6.2grams. So performance should be pretty similar
Re: Where are the shimanos?
I feel like I need a 51 sized BFS in my life
- BARRAMANIAC
- Platinum Angler
- Posts: 1213
- Joined: Thu Apr 20, 2006 10:00 pm
- Location: Townsville , Queensland , Australia
Re: Where are the shimanos?
Haven't seen any picks of a 2015 twinpower yet. Has anyone got one?
- the hooligan
- Pro Angler
- Posts: 1751
- Joined: Sat Sep 01, 2012 11:25 am
- Location: South Jersey
Re: Where are the shimanos?
Yes you doIAY wrote:I feel like I need a 51 sized BFS in my life
- João Miguel Oliveira
- Angler
- Posts: 32
- Joined: Sat Apr 26, 2014 8:01 pm
Re: Where are the shimanos?
Last edited by João Miguel Oliveira on Sun May 24, 2015 3:19 am, edited 1 time in total.
- Bootytrain
- Pro Angler
- Posts: 2449
- Joined: Fri Mar 29, 2013 8:28 am
Re: Where are the shimanos?
Got to fish it for a few min today, throwing a 3.5 gram ul minnow. Getting long distance with over head casts and underhand pitches. 3-4 brakes on. Impressions tell me this will outcast the Revo LTZ, and definitely the regular BFS XG. The slick 4lb mono I was using was getting between the spool and frame on a few casts, the same thing happened with the regular XG at first. Overall very pleased.
Re: Where are the shimanos?
Nice review bootytrain. Was just thinking of removing the spool on the bearing on my ktf spool so it will run on a single 730 and 1030(micro bearing) not sure it it will work. It seems to spin and crank fine without that bearing on the spool shaft.
Havent got to casting n retrieving this combination yet.
Waiting for hooligan to have his so he can do a direct comparison with the regular BFS XG outfitted with a KTF spool before i pull the trigger.
Havent got to casting n retrieving this combination yet.
Waiting for hooligan to have his so he can do a direct comparison with the regular BFS XG outfitted with a KTF spool before i pull the trigger.
- the hooligan
- Pro Angler
- Posts: 1751
- Joined: Sat Sep 01, 2012 11:25 am
- Location: South Jersey
Re: Where are the shimanos?
Mine will be here todayflyfishy wrote:Nice review bootytrain. Was just thinking of removing the spool on the bearing on my ktf spool so it will run on a single 730 and 1030(micro bearing) not sure it it will work. It seems to spin and crank fine without that bearing on the spool shaft.
Havent got to casting n retrieving this combination yet.
Waiting for hooligan to have his so he can do a direct comparison with the regular BFS XG outfitted with a KTF spool before i pull the trigger.
Im pretty sure its going to be very similar performance between my ktf xg and limited. Since they got rid of the spool mounted bearing, i would prefer a pair of 1030's instead of 730's though...
- the hooligan
- Pro Angler
- Posts: 1751
- Joined: Sat Sep 01, 2012 11:25 am
- Location: South Jersey