Steez Carbon Crank Handle by I'ze Factory
Steez Carbon Crank Handle by I'ze Factory
Got it a few weeks ago from PLAT and swapped on my Steez 100HL but didn't have to take some pics.
The carbon crank handle is available both in 80 and 90 mm length and the stated weight for the 90 mm is 5/8 oz. (18 grams).
Looks much cooler than the stock handle but I don't think it's much lighter, since the aluminium handle seems almost as light. Anyway, it also comes with all the goodies inside, including 4 CRBB's if you want to buy this handle for Zillion, which can be used in s/w (unlike the Steez).
The carbon crank handle is available both in 80 and 90 mm length and the stated weight for the 90 mm is 5/8 oz. (18 grams).
Looks much cooler than the stock handle but I don't think it's much lighter, since the aluminium handle seems almost as light. Anyway, it also comes with all the goodies inside, including 4 CRBB's if you want to buy this handle for Zillion, which can be used in s/w (unlike the Steez).
- Attachments
-
- Steez1.jpg (84.26 KiB) Viewed 8078 times
-
- Steez4.jpg (62.15 KiB) Viewed 8078 times
-
- Steez5.jpg (71.92 KiB) Viewed 8078 times
-
- Steez6.jpg (75.19 KiB) Viewed 8078 times
-
- Steez9.jpg (76.05 KiB) Viewed 8078 times
Re: Steez Carbon Crank Handle by I'ze Factory
Very nice reel!
With which rod do you want to fish it?
With which rod do you want to fish it?
!!!!!!!Good luck at water!!!!!!!
Re: Steez Carbon Crank Handle by I'ze Factory
thats a really nice crank ya got there
Re: Steez Carbon Crank Handle by I'ze Factory
It will be used with the EG Stallion for the moment... I'm looking for a TD-Z Custom in metallic black for the Stallion and then the Steez will go on another upcoming EG rod - the ultimate medium jigs & soft plastics rod, the Air Driver.
Forgot to mention - I've got the handle from PLAT, they have them in stock
Forgot to mention - I've got the handle from PLAT, they have them in stock
Re: Steez Carbon Crank Handle by I'ze Factory
That is sick! I want one of those!
Re: Steez Carbon Crank Handle by I'ze Factory
Ditto! Now where the devil do I find it on PLat's site and "how much"? Gadgetwingman wrote:That is sick! I want one of those!
Re: Steez Carbon Crank Handle by I'ze Factory
http://www.plat.co.jpmrgadget wrote:Ditto! Now where the devil do I find it on PLat's site and "how much"? Gadgetwingman wrote:That is sick! I want one of those!
I do not accept any responsibility for any material or psychological damage you may suffer, you want to jump from the cliff do it, I just tell you which is the best spot from where to do it, OK ?
Re: Steez Carbon Crank Handle by I'ze Factory
I can (and have been) able to regualrly acces Plat's site. The issue I have is FINDING the handle.... I can find the flat carbon handles, but how do I find the swept handle?
Thanks, G
Thanks, G
Re: Steez Carbon Crank Handle by I'ze Factory
They are on the new site:mrgadget wrote:I can (and have been) able to regualrly acces Plat's site. The issue I have is FINDING the handle.... I can find the flat carbon handles, but how do I find the swept handle?
Thanks, G
PLAT - STEEZ CARBON HANDLE
- Nitroman77
- Pro Angler
- Posts: 9983
- Joined: Mon May 09, 2005 8:10 am
- Location: saint louis/charles MO
- Contact:
Re: Steez Carbon Crank Handle by I'ze Factory
Can that handle be used on a TDZ or Pixy?
THkustoms.com
Dobyns rods
Omega custom tackle
Biospawn
seaguar
phoenix boats
Dobyns rods
Omega custom tackle
Biospawn
seaguar
phoenix boats
Re: Steez Carbon Crank Handle by I'ze Factory
if you replace the dragstar at the same time, probably.skeeterboy77 wrote:Can that handle be used on a TDZ or Pixy?
Cal, Managing Editor
"fish with mindfulness : beware the darkside"
"fish with mindfulness : beware the darkside"
- Nitroman77
- Pro Angler
- Posts: 9983
- Joined: Mon May 09, 2005 8:10 am
- Location: saint louis/charles MO
- Contact:
Re: Steez Carbon Crank Handle by I'ze Factory
I could heat up the pixy stamped star and bend it...
THkustoms.com
Dobyns rods
Omega custom tackle
Biospawn
seaguar
phoenix boats
Dobyns rods
Omega custom tackle
Biospawn
seaguar
phoenix boats
- Fishingboy
- Platinum Angler
- Posts: 921
- Joined: Sun Jul 16, 2006 7:29 pm
- Location: Great Britain
- Contact:
Re: Steez Carbon Crank Handle by I'ze Factory
You could try. but i would suggest that you check if the steez drag star fits the Pixy . considering it's color, it should go well with the yellow pixy.skeeterboy77 wrote:I could heat up the pixy stamped star and bend it...
- LOBINAKING
- Elite Angler
- Posts: 549
- Joined: Tue Apr 18, 2006 1:30 pm
- Location: San Diego, CA
Re: Steez Carbon Crank Handle by I'ze Factory
Very Nice.
My biggest worry is that my wife (when I'm dead) will sell my fishing gear for what I said I paid for it.