'19 Steez ct sv tw
Re: '19 Steez ct sv tw
what is the spool size, can it swap with the steez tw sv?
Re: '19 Steez ct sv tw
It's a 30mm spool and no it will not swap into the current steez tw sv. The steez ct is smaller and the spool is not only smaller in diameter but also more narrow.j2015 wrote:what is the spool size, can it swap with the steez tw sv?
Re: '19 Steez ct sv tw
Thanksss30378 wrote:It's a 30mm spool and no it will not swap into the current steez tw sv. The steez ct is smaller and the spool is not only smaller in diameter but also more narrow.j2015 wrote:what is the spool size, can it swap with the steez tw sv?
Re: '19 Steez ct sv tw
I went with the 8.1:1. It will be used mostly for small plastics. I have a Steez SV TW 1012 in 8.1:1 and it works fine with jerkbaits.Pastrmka wrote:Which model are you guys buying, 6.3 or 8.1....I'm bit undecided, never had reel with high gear ratio but seeing IPT on 8.1 is more in line with 7.1 reels it does not seem that high. Will be mostly used with lures from 1/8 to 3/8 (cranks, jerkbaits, spinnerbait)
-
- TT Moderator
- Posts: 6803
- Joined: Mon Feb 28, 2011 1:56 pm
- Location: Oxford GA
Re: '19 Steez ct sv tw
Good move. With such a small O.D. spool, the 8 gear ratio probably wont take up as much line as a typical 7 gear reel. The IPT on the 6.3 is probably in the cranking range, 22-25 IPT is what Im thinking.njbasscat wrote:I went with the 8.1:1. It will be used mostly for small plastics. I have a Steez SV TW 1012 in 8.1:1 and it works fine with jerkbaits.Pastrmka wrote:Which model are you guys buying, 6.3 or 8.1....I'm bit undecided, never had reel with high gear ratio but seeing IPT on 8.1 is more in line with 7.1 reels it does not seem that high. Will be mostly used with lures from 1/8 to 3/8 (cranks, jerkbaits, spinnerbait)
Try not to let your mind wander. It is much too small to be outside unsupervised.
Re: '19 Steez ct sv tw
I've ordered 8.1....this ratio seems to be more popular too since it's out of stock at few jdm websites, only 6.3 is in stock
Re: '19 Steez ct sv tw
I was also very curious about the IPT and the box for the 8.1 says 29.9".
The 6.3 says 23.2" IPT.
The 6.3 says 23.2" IPT.
Re: '19 Steez ct sv tw
Daiwa claims 59cm or 23.22" for the 6.3 ratio and 76cm or 29.92" for the 8.1 ratio
Re: '19 Steez ct sv tw
Anyone own one yet and have done any casting with it??? I didn’t make it through the entire thread. But when I started I didn’t want one, 2 pages in I’m checking account balances. Hate you guys btw
Re: '19 Steez ct sv tw
I'm awaiting my steez ct to get here but I have a couple hours on an alphas ct which is supposed to have the same spool. Casts super flat, accurate, and surprisingly far for that little spool. There is a real chance to strip the spool completely with an aerodynamic lure if your using over 8lb diameter line. The most noticeable thing of the ct spool to me is the startup speed is so quick making for very accurate flat casts. Even simple pitches take off like no line is attached to the lure. Its a very fun spool.Samuel_b wrote:Anyone own one yet and have done any casting with it??? I didn’t make it through the entire thread. But when I started I didn’t want one, 2 pages in I’m checking account balances. Hate you guys btw
Re: '19 Steez ct sv tw
Pretty sweet, and pretty small. Should go well on the Oltre 6'7 M. Take her for a test run in the AM.
Re: '19 Steez ct sv tw
Very nice! Can you weigh the spool? The alphas ct is 9.4g with bearing.
Re: '19 Steez ct sv tw
Reel weighed 151 grams and spool weighed 9.0 grams. It's a Target digital scale though...ss30378 wrote:Very nice! Can you weigh the spool? The alphas ct is 9.4g with bearing.
Re: '19 Steez ct sv tw
Awesome, sounds like the spool may be a tad lighter. I'll weigh mine once it gets here to confirm on the same scale. Reel looks pretty small as well but you may have a huge hand?Aquaftm45 wrote:Reel weighed 151 grams and spool weighed 9.0 grams. It's a Target digital scale though...ss30378 wrote:Very nice! Can you weigh the spool? The alphas ct is 9.4g with bearing.
-
- Pro Angler
- Posts: 1948
- Joined: Sat Aug 29, 2015 1:34 pm
- Location: NW OKC OK USA