Shallow spool for Morrum sx1601c
Shallow spool for Morrum sx1601c
Curious if the Avail Microcast spools will fit my particular reel.
Re: Shallow spool for Morrum sx1601c
there are Avail spools to fit most if not all versions of the SX, though Avail may have ceased production on some of them (those for the SX Hi Speed for example).
<correlation does not equal causality>
- facelessnewsouth
- Pro Angler
- Posts: 1540
- Joined: Mon Feb 28, 2011 2:02 pm
- Location: Savannah, GA
Re: Shallow spool for Morrum sx1601c
Does your reel have the IVCB braking system? If so, check the last item on this page:
http://www.japantackle.com/Tuning_parts ... ls_abu.htm
If not, I'd send Jun an email anyway and see if he could get his hands on a spool for your reel. As zb said, it might just not be in production anymore.
http://www.japantackle.com/Tuning_parts ... ls_abu.htm
If not, I'd send Jun an email anyway and see if he could get his hands on a spool for your reel. As zb said, it might just not be in production anymore.
Re: Shallow spool for Morrum sx1601c
The reel doesn't come with the ICVB braking system. Checked online, and one auction site shows multiple spools, but the descriptions were vague. Sent an email to Jun. I'll wait and see what he says. Thanks all!
Re: Shallow spool for Morrum sx1601c
if your reel does not have the external brake adjustment dial, its the SX1601C Hi Speed.igl00jx wrote:Checked online, and one auction site shows multiple spools, but the descriptions were vague.
the model inscription on the frame above the levelwind should indicate if its an SX Mag, Ultra Mag/Forell, or IVCB in which case it's just a matter of ordering the matching spool thru japantackle.
UM, Forell, & IVCB tuneup spools are compatible with each other. Hi Speed & SX Mag tuneup spools only work with their respective reels.
Last edited by zenbassr on Fri Apr 20, 2012 8:43 am, edited 1 time in total.
<correlation does not equal causality>
Re: Shallow spool for Morrum sx1601c
Mine is the Hi Speed as it lacks any external brake adjustments.
Re: Shallow spool for Morrum sx1601c
It's been a while since I've had my Ultra Mag S2 but it had an external brake adjustment. Can you post a pic of the non-handle sideplate?
Re: Shallow spool for Morrum sx1601c
I have that same reel only right handed SX1600C. I also have a 3600 Forrell which came with a shallow spool, but I don't know if a 1600 Forrell would work.
Re: Shallow spool for Morrum sx1601c
Don't have a picture, but the following link is the one that I bought:
http://forums.tackletour.com/viewtopic. ... 1c#p311353
http://forums.tackletour.com/viewtopic. ... 1c#p311353
Re: Shallow spool for Morrum sx1601c
the Hi Sp spool has 2-pin brakes, so its spool won't work in the SX versions using magnetic braking (Mag, UM, S2, Forell) and won't work with the IVCB centrifugal system either... i have a couple of Morrum SX's so can tell you from experience.
if you can source JDM parts, you may be able to convert the sideplate to accept the spools above, but since these reels are discontinued it may be easier to locate the Hi Sp tuneup spool than find all the parts for a conversion.
if you can source JDM parts, you may be able to convert the sideplate to accept the spools above, but since these reels are discontinued it may be easier to locate the Hi Sp tuneup spool than find all the parts for a conversion.
<correlation does not equal causality>
Re: Shallow spool for Morrum sx1601c
Didn't realize I could convert the reel using the aforementioned sideplate. Will have to scratch that idea for the moment
Will see what I can find regarding the tune up spool. Thanks all!
Will see what I can find regarding the tune up spool. Thanks all!
Re: Shallow spool for Morrum sx1601c
I have the right hand version of your reel........Try this url:
http://avail.jp/shop/products/ms_zxum/index.html
http://avail.jp/shop/products/ms_zxum/index.html
Re: Shallow spool for Morrum sx1601c
yeah, that's no mag brake version ...igl00jx wrote:Don't have a picture, but the following link is the one that I bought:
http://forums.tackletour.com/viewtopic. ... 1c#p311353
Re: Shallow spool for Morrum sx1601c
Received an email from Kayo at Japantackle and was told this spool would fit my reel:
http://www.avail.jp/shop/products/ms_sxmg16/index.html
$124 after shipping was the price quoted. Will have to buy, as the tackle gorilla is strong.
http://www.avail.jp/shop/products/ms_sxmg16/index.html
$124 after shipping was the price quoted. Will have to buy, as the tackle gorilla is strong.
Re: Shallow spool for Morrum sx1601c
might want to have them verify that, since in translation it states it won't fit your reel:
http://babelfish.yahoo.com/translate_ur ... =Translate
i'd have them confirm that this spool has the pins mounted for the brake weights... if they didn't mention using the Avail mag brake assembly in conjunction with this spool, then i don't see where your braking will come from besides your thumb
http://babelfish.yahoo.com/translate_ur ... =Translate
i'd have them confirm that this spool has the pins mounted for the brake weights... if they didn't mention using the Avail mag brake assembly in conjunction with this spool, then i don't see where your braking will come from besides your thumb
<correlation does not equal causality>