Search found 380 matches

by PikeRoadBassn
Tue Sep 11, 2018 7:07 am
Forum: Reels
Topic: sv spool problems
Replies: 14
Views: 3254

Re: sv spool problems

Replace the inductor base.

If you’re comfortable with taking the inductor side apart, it’s pretty simple. If not, we charge $18 with return shipping to do it for you
by PikeRoadBassn
Mon Sep 10, 2018 4:50 pm
Forum: Reels
Topic: sv spool problems
Replies: 14
Views: 3254

Re: sv spool problems

Broken inductor base. I’ve swapped a bunch of them. If you look at the spool from the bearing side, you should see two white “clips” stick through. Chances are you won’t, and that’s the issue. When those break, the entire inductor, base and all, spins on the spool.
by PikeRoadBassn
Sat Aug 25, 2018 5:12 am
Forum: Reels
Topic: Inductor Swaps
Replies: 6
Views: 1617

Re: Inductor Swaps

You can not turn a non SV spool into a SV spool. Too many differences.
by PikeRoadBassn
Thu Jul 26, 2018 3:42 pm
Forum: Maintenance & SuperTuning Q&A
Topic: BFS bearing 4x7x2.5 (Shimano knob size)
Replies: 11
Views: 2363

Re: BFS bearing 4x7x2.5 (Shimano knob size)

What spool is it? I’m unaware of a reel that takes that size bearing for a spool. Avail Aldebaran BFS XG 1615r (new shallow spool) If Im not mistaken, that should be a 3x7x3 bearing. I see where HH Studio shows a 740ZZ, but I feel certainly that is a typo. If it is indeed a 3x7x3, we have the HH Ai...
by PikeRoadBassn
Thu Jul 26, 2018 5:21 am
Forum: Maintenance & SuperTuning Q&A
Topic: BFS bearing 4x7x2.5 (Shimano knob size)
Replies: 11
Views: 2363

Re: BFS bearing 4x7x2.5 (Shimano knob size)

What spool is it? I’m unaware of a reel that takes that size bearing for a spool. Avail Aldebaran BFS XG 1615r (new shallow spool) If Im not mistaken, that should be a 3x7x3 bearing. I see where HH Studio shows a 740ZZ, but I feel certainly that is a typo. If it is indeed a 3x7x3, we have the HH Ai...
by PikeRoadBassn
Wed Jul 25, 2018 9:23 pm
Forum: Maintenance & SuperTuning Q&A
Topic: BFS bearing 4x7x2.5 (Shimano knob size)
Replies: 11
Views: 2363

Re: BFS bearing 4x7x2.5 (Shimano knob size)

What spool is it? I’m unaware of a reel that takes that size bearing for a spool.
by PikeRoadBassn
Tue Jul 24, 2018 8:08 pm
Forum: Maintenance & SuperTuning Q&A
Topic: Weak Drag on OG Zillion
Replies: 6
Views: 2613

Re: Weak Drag on OG Zillion

Sounds like 2 spacers are missing. 1 sits on top of the roller clutch inner tube, one sits on top of the handle support bearing.
by PikeRoadBassn
Tue Jul 24, 2018 8:05 pm
Forum: Maintenance & SuperTuning Q&A
Topic: sticky inductor ??
Replies: 8
Views: 2209

Re: sticky inductor ??

Sounds like some grit or something has made its way down into the inductor side of the spool. Pull the spool, spray it down good with some CRC Electrical component cleaner and blow it out. Then apply one drop of oil to each inductor ramp/block, and one drop on the spool shaft where the inductor ride...
by PikeRoadBassn
Thu Jun 07, 2018 7:38 pm
Forum: Reels
Topic: Daiwa steez a
Replies: 3
Views: 1277

Re: Daiwa steez a

With a ZPI Handle, and 4 bearings, and RCS knobs mine comes in at 6.33 ounces. With the bushings it would probably be lighter. If you’re adventurous enough, you could port the stock spool to remove more weight, and increase spool performance.
by PikeRoadBassn
Thu May 31, 2018 5:23 am
Forum: Reels
Topic: TD Fuego spool compatibility ???
Replies: 2
Views: 942

Re: TD Fuego spool compatibility ???

Any of the TD Zillion spools, HLC, PE Special, Etc and the TDZ 100M spool.
by PikeRoadBassn
Wed May 16, 2018 2:14 pm
Forum: Reels
Topic: Daiwa Zillion handle
Replies: 18
Views: 4147

Re: Daiwa Zillion handle

SV103 Knob fits as well

Image
by PikeRoadBassn
Wed May 16, 2018 1:52 pm
Forum: Reels
Topic: Daiwa Zillion handle
Replies: 18
Views: 4147

Re: Daiwa Zillion handle

Just for giggles, I just went and swapped a Zillion R knob onto a used Zillion TW HD I have in the shop. Fits perfectly fine. Did you make sure you didn’t leave the bushing in the bottom of your SV103 knobs?

Image
by PikeRoadBassn
Wed May 16, 2018 1:43 pm
Forum: Reels
Topic: Daiwa Zillion handle
Replies: 18
Views: 4147

Re: Daiwa Zillion handle

Interesting, because I have a set of knobs from a Zillion Type R handle on mine. And those knobs interchange with every other Daiwa and RCS knob out there.
by PikeRoadBassn
Wed May 16, 2018 7:08 am
Forum: Reels
Topic: Daiwa Zillion handle
Replies: 18
Views: 4147

Re: Daiwa Zillion handle

I had the same issue. I used a fork where I bend all but two of the fingers back. Still havent found knobs that fit the handle of the Zillion HD though. Did you have any luck? Any Daiwa or RCS knob will fit it. It does not! I tried the knobs of my SV103 on the Zillion HD and the knobs do not fit......
by PikeRoadBassn
Mon May 14, 2018 5:06 pm
Forum: Reels
Topic: Micro Module Gear Core MG8 SVS infinity
Replies: 8
Views: 2443

Re: Micro Module Gear Core MG8 SVS infinity

At this point, I think your best option would be to find a 12 Exsence DC and I am sure you could swap some MM gears/pinion from something else by now. You may be a test subject though. You would also be missing the SVS system but the DC+ system on that reel is probably better if you like DC. That i...